Ingestion: Unlikely to be a problem, this should not occur.
8. SAFE HANDLING
Spills: Shut off ignition and source of leak. Evacuate all non-essential personnel from the area. If possible,
ventilate the area. Use water spray to disperse vapors. Isolate and ventilate area until gas has dispersed. If the
incident is significant seek assistance from local fire, police and other relevant authorities.
Waste Disposal Method: Dispose of product in accordance with local, county state, and federal regulations.
Storage, Handling, Shipping: Store in a cool, well-ventilated area. Store away from strong oxidizing agents, chlorine
dioxide, excessive heat and/or static discharge. Cylinders must be stored and transported in an upright position.
Other Precautions: Empty containers may contain flammable or combustible vapors. Dot no use without adequate
precautions.
9. PERSONAL PROTECTION
Engineering Controls: Use only in a well ventilated area! Ensure there is good ventilation. If additional ventilation is
needed use auxiliary ventilation equipment ensuring that all systems are well grounded and spark proof.
Eyes: Wear safety chemical safety glasses with side shields and/or goggles.
Gloves: Use thermal, chemical resistant gloves when handling this product.
Other protective clothing: Long sleeves, pants and close-toed shoes.
Respiratory Protection: If ventilation of the area is not adequate use a NIOSH approved respirator to prevent
overexposure by inhalation.
10. PREPARATION
NTE Electronics Inc., 44 Farrand Street, Bloomfield, NJ 07003
Telephone: 1-800-631-1250
May 16,2005
All information provided for this MSDS sheet by NTE Electronics Inc., is offered in good faith and is believed to be
accurate to the best knowledge of the preparation analyst. The information contained in this document is based on
documentation provided by the supplier and other documentation/information available at the date of preparation. NTE
Electronics does not guarantee the accuracy of this document and this information is offered without warranty, guarantee
or liability on the part of the preparation analyst in good faith.
