CYPRESS
LUPA 3000
485 FPS,13.3 Gbit
HiGH SPeed imAGe SenSor
PRODUCT OVERVIEW
FEATURES
DESCRIPTION
•ꢀ1696 x 1710 active pixels
•ꢀ8 μm x 8 μm square pixels
•ꢀ1 inch optical format
The LUPA 3000 is a high speed CMOS image sensor with an image resolution of
1696 x 1710 pixels. The pixels are 8 μm x 8 μm in size and consist of high sensitivity 6T
pipelined snapshot shutter capability, where integration during readout is possible. The
LUPA 3000 delivers 8-bit color or monochrome digital images with a 3 MPixel resolution
at 485 fps which makes this product ideal for high speed vision machine, intelligent traffic
system, and holographic data storage. The LUPA 3000 captures complex high speed events
for traditional machine vision applications and various high speed imaging applications.
•ꢀMono and color with micro lens
•ꢀ485 fps frame rate
•ꢀ64 on-chip 8-bit ADCs
•ꢀ32 LVDS serial outputs
•ꢀRandom programmable ROI readout
•ꢀPipelined and Triggered snapshot shutter
•ꢀSerial to Parallel Interface (SPI)
The sensor contains 64 on-chip 8 bit ADCs operating at 25.75 Msamples/s each, resulting
in an aggregate pixel rate of 1.4 Gpix/s. The outputs of the 64 ADCs are multiplexed onto
32 LVDS serial links operating at 412 Mbit/s each resulting in an aggregate data rate of
13.3 Gbit/s.
•ꢀ Limited supplies: Nominal 2.5V (some
supplies require 3.3V)
•ꢀ 0°C to 60°C operational temperature range
•ꢀ 369-pin ceramic μPGA package
•ꢀ Power dissipation: 1.1W
The 32 data channel LVDS interface allows a very high data rate with a limited number
of pins. Each channel runs at 51.5 MSPS pixel rate which results in 485 fps frame rate
at full resolution. The LUPA 3000 can achieve higher frame rates by windowing which
is programmable over the SPI interface. All required clocks, control, and bias signals are
generated on-chip. The incoming high speed clock is divided to generate the different low
speed clocks required for the operation of the sensor. The sensor generates all its bias signals
from an internal bandgap reference. An on-chip sequencer generates all the required control
signals for the image core, the ADCs, and the on-chip digital data processing path. The
sequencer settings are stored in registers that can be programmed through the serial command
interface. The sequencer supports windowed readout at frame rates up to 10,000 fps.
APPLICATIONS
•ꢀHigh speed machine vision
•ꢀHolographic data storage
•ꢀMotion analysis
•ꢀIntelligent traffic system
•ꢀMedical imaging
The LUPA 3000 production package will be housed in a 369-pin ceramic μPGA package
and will be available in a monochrome version or Bayer (RGB) patterned color filter array
with micro lens in Q409. Contact your local Cypress representative for more information.
www.cypress.com/go/imagesensors
