CZM1-300 Series
Surface Mount Voltage Controlled Oscillators
Notes:
! Exceeding Limits may cause permanent damage.
! A series dropping resistor will allow operation at higher voltage
! External bypassing of both Vcc and Vt can improve phase noise performance and power supply
decoupling.
! Specifications subject to change without notice.
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
REFERENCE PROCEDURES
DESCRIPTION
-55°C to +125°C; Air-to-Air; 100 cycles; 10 min.
Temperature Cycle
MIL-STD-833, Mtd 1010, Cond. B
dwell
Mechanical Shock
Vibration
Humidity Steady State
Thermal Shock
Electrostatic Discharge
Solderability
MIL-STD-202, Mtd 213, Cond. D
MIL-STD 202, Mtd 204, Cond. B
MIL-STD-202, Mtd 103
MIL-STD-883, Mtd 1011.7 Cond. A
MIL-STD-883, Mtd 3015 Class II
MIL-STD-883, Mtd 2022.2
500 g’s
10-2000 Hz; 0.06 inch; 15g; 3 planes
40°C; 90%-95% R.H.; 56 days
100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
235°C; 30 seconds
Hermeticity
MIL-STD-883, Mtd 1014.8, Cond. A1
Resistance to Soldering MIL-STD-202, Mtd 210D, Cond. J
Lead Integrity
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
Marking Permanence
Life Test
MIL-STD-883, Mtd 2015.8
MIL-STD-883, Mtd 1005.6
Resistance to solvents
125°C, powered, 1000 hours minimum
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: 847.451.1000 " Fax: 847.451.7585
800-888-1499 or www.champtech.com
2
