AZ988
30 AMP MICRO-ISO
AUTOMOTIVE RELAY
FEATURES
• Quick Connect or PCB terminals
• Up to 30 Amp switching capability in a compact size
• Coils up to 24VDC
• Small footprint
• SPST (1 Form A), SPDT (1 Form C)
• Vibration and shock resistant
• Coil suppression available
• ISO/TS 16949, ISO9001 and ISO 14000
• Tested in accordance with SAE J2544
• Cost effective solution
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 20 A 12 VDC Res.
• Designed for high in-rush applications
CONTACTS
Operate Time (max.)
Release Time (max.)
10 ms max. at nominal coil voltage
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
10 ms max. at nominal coil voltage
(with no coil suppression)
Ratings
Resistive load:
Dielectric Strength
(at sea level for 1 min.) 500 VRMS between open contacts
500 VRMS coil to contact
Max. switched power: 540 W
Max. switched current: 30 A
Max. switched voltage: 27 VDC
Insulation Resistance 1 megohms min. at 20°C, 500 VDC
1 Form A (N.O.)
50% RH
30 A / 30 A (make/break) at 12 VDC resistive
40 A / 20 A (make/break) at 12 VDC motor
120 A / 20 A (make/break) at 12 VDC lamp
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
1 Form C (N.O.)
Operating
Storage
-40°C (-40°F) to 125°C (257°F)
-40°C (-40°F) to 155°C (320°F)
20 A / 20 A (make/break) at 12 VDC resistive
40 A / 20 A (make/break) at 12 VDC motor
120 A / 20 A (make/break) at 12 VDC lamp
Vibration
5g 10-500 Hz
1 Form C (N.C.)
Shock
20 g
10 A / 10 A (make/break) at 12 VDC resistive
20 A / 10 A (make/break) at 12 VDC motor
40 A / 10 A (make/break) at 12 VDC lamp
Enclosure
Terminals
P.B.T. polyester
Quick connects or PCB
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Material
Silver tin oxide (silver nickel available - contact factory)
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Max Solder Temp.
Max Solder Time
Max Solvent Temp
Max Immersion Time
Weight
270°C (518°F)
5 seconds
Contact Voltage 100 mV typical, 250 mV max. at rated load
drop
80°C (176°F)
30 seconds
22 grams
COIL
Power
At Pickup Voltage
(typical)
576 mW (Standard)
418 mW (Sensitive)
NOTES
Max. Continuous
Dissipation
3.6 W at 20°C (68°F) ambient
1. All values at 20°C (68°F).
Temperature Rise
Max Temperature
60°C (108°F) at nominal coil voltage
180°C (356°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
6/27/06W
