AZ9 3 9
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint utilizing only 0.22 square inch
of PCB area
• Thin vertical profile only 0.283" wide
• 1 Form A contact with up to 3 Amp switching capability
• High sensitivity, 113 mW pickup
• Dielectric strength 4000 Vrms contact to coil
• Coils to 24 VDC
• Epoxy sealed for automatic wave soldering
and cleaning
• UL, CUR file E43203
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
5 million operations
1 X 105 at 3 A, 30 VDC or 250 VAC Res.
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 90 W or 750 VA
Max. switched current: 3 A
Operate Time (typical) 6 ms at nominal coil voltage
Max. switched voltage: 150* VDC or 250 VAC
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Dielectric Strength
750 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms contact to coil
Rated Load
UL/CSA
3 A at 250 VAC, general use, 100k cycles
3 A at 30 VDC, resistive, 200k cycles
1/10 HP at 250 VAC, 100k cycles
Insulation
1000 megohms min. at 20°C, 500 VDC,
Resistance
50% RH
Material
Silver nickel
Dropout
Greater than 10% of nominal coil voltage
Resistance
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
10 g
COIL
Shock
Power
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
At Pickup Voltage
(typical)
113 mW
Terminals
Max. Continuous
Dissipation
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
750 mW at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage
Temperature Rise
Temperature
80°C (176°F)
Max. 105°C (221°F)
Max. Immersion Time 30 seconds
Weight 4 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Minimum permissible contact load.
4. Specifications subject to change without notice.
8/22/02W
