AZ8462
MICROMINIATURE
POLARIZED RELAY
FEATURES
• SMT and DIP mounting available
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Monostable and bistable (latching) versions available
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108 at 3Hz
1 x 105 at 0.5 A, 125 VAC, Res.
1 x 105 at 2.0 A, 30 VDC, Res.
• All plastics meet UL94 V–0, 30 min. oxygen index
Operate Time
(max)
4 ms at nominal coil voltage
Release Time (max)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level)
See table
CONTACTS
Dropout
Greater than 10% of nominal coil voltage
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Insulation Resistance 109 ohms min. at 25°C, 500 VDC,
50% RH
Ratings
Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
Rated Load
UL/CUR
Vibration
Operational, 3.3 mm DA, 10–55 Hz
Non-destructive, 5.5 mm DA, 10–55 Hz
0.5 A at 125 VAC general use
2.0 A at 30 VDC
Shock
Operational, 75 g min., 11 ms
Non-destructive, 100 g min., 11 ms
Material
Silver nickel, gold plated
Resistance
< 50 milliohms initially at 6 V, 1 A
Max. Solder Temp.
Max. Solvent Temp.
260°C (500°F) for 5 seconds
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
2 grams
COIL (Polarized)
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, P.C.
Power
At Pickup Voltage
(typical)
79 mW (3–24 VDC)
152 mW (48 VDC)
Max. Continuous
Dissipation
NOTES
0.32 W at 20°C (68°F)
Temperature Rise
Temperature
At 30° C (54°F) nominal coil voltage
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
Max. 115°C (239°F)
4. Specifications subject to change without notice.
4/16/09W
