AZ826
SUBMINIATURE
ULTRA-SENSITIVE
DIP RELAY
FEATURES
• Low profile for compact board spacing
• DC coils to 24 VDC
• Bifurcated crossbar contacts
• Ultra-sensitivity, 84 mW pickup
• Life expectancy to 10 million operations
• High switching capacity, 24 W, 125 VA
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• UL, CUR file E43203
CONTACTS
GENERAL DATA
Arrangement
Ratings
DPDT (2 Form C)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 1.0 A 120 VAC Res.
Max. switched power: 24 W or 125 VA
Max. switched current: 2 A
Operate Time (typical) 6 ms at nominal coil voltage
Max. switched voltage: 150 VDC or 220 VAC
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL
2.0 A at 30 VDC
1.0 A at 125 VAC
Dielectric Strength
1500 Vrms contact to coil
(at sea level for 1 min.) 500 Vrms between open contacts
Material
Silver, gold plated
1500 Vrms contact set to contact set
Resistance
< 50 milliohms initially
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F) standard
COIL
-40°C (-40°F) to 80°C (176°F) sensitive
-40°C (-40°F) to 85°C (185°F) ultra-sensitive
-40°C (-40°F) to 105°C (221°F)
Power
At Pickup Voltage
(typical)
180 mW standard
100 mW sensitive
84 mW ultra-sensitive
Vibration
1.5 mm DA at 10–55 Hz
50 g 11 ms 1/2 sine
P.B.T. polyester
Tinned copper alloy
270°C (518°F)
Max. Continuous
Dissipation
1.2 W at 20°C (68°F)
Shock
Enclosure
Temperature Rise
34°C (61°F) standard
23°C (41°F) sensitive
19°C (34°F) ultra-sensitive
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Temperature
Max. 105°C (221°F)
5 seconds
80°C (176°F)
NOTES
Max. Immersion Time 30 seconds
Weight 4.5 grams
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
2/20/08W
