AZ769
25 AMP MINIATURE
POWER RELAY
FEATURES
• Low cost
• 25 Amp switching
• 80 Amp inrush current
• Quick connect and PCB terminals
• Flux tight construction
• UL, CUR file E44211
• VDE Pending
CONTACTS
GENERAL DATA
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 106
1 x 105 at 25 A 277 VAC Res.
Max. switched power: 600 W or 6925 VA
Max. switched current: 25 A
Operate Time (typical) 20 ms at nominal coil voltage
Max. switched voltage: 150* VDC or 400 VAC
Release Time (typical) 10 ms at nominal coil voltage
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.) 1500 Vrms between open contacts
4500 Vrms coil to contact
Rated Load
UL, CUR
25A at 277 VAC resistive (100k cycles) [1] [2]
1 HP at 120 VAC (100k cycles) [1] [2]
2 HP at 240 VAC (100k cycles) [2]
2 HP at 240 VAC (30k cycles) [1]
10,000 V surge contact to coil
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
TÜV
25 A 250 VAC resistive [1] [2]
Ambient Temperature At nominal coil voltage
Material
Resistance
silver cadmium oxide [1], silver tin oxide [2]
Operating
Storage
-40°C (-40°F) to 80°C (176°F)
-40°C (-40°F) to 130°C (266°F)
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Vibration
0.062" DA at 10–55 Hz
COIL
Shock
Operating
20 g, 11 ms, 1/2 sine (no false operation)
Power
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
At Pickup Voltage
(typical)
441 mW
Enclosure
Terminals
P.B.T. polyester
Max. Continuous
Dissipation
Tinned copper alloy
P.C. & quick connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
2.25 W at 20°C (68°F) ambient
Temperature Rise
Temperature
45°C (81°F) at nominal coil voltage
Max. 130°C (266°F)
Max. Solder Temp.
Max. Solder Time
Weight
270°C (518°F)
5 seconds
NOTES
23 grams
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4/24/09W
