CORCOM Product Guide
High Performance RFI Filters for Switching Power Supply
N Series
UL Recognized
CSA Certified
VDE Approved
6VN1
10VN1
N Series
Specifications
Maximum leakage current,each line-to-ground
The N series RFI filters are designed to provide superior
common-mode and differential-mode attenuation for most
digital electronic equipment (particularly switching power
supplies) over the frequency range of 10kHz to 30MHz.
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
Hipot rating (one minute):
line-to-ground
line-to-line
Operating frequency:
1.2mA
2.0mA
2250 VDC
1450 VDC
50/60 Hz
These filters are a cost-effective solution for very noisy
equipment that must meet the conducted emission limits of
the very stringent EN55022 Level B requirements, as well
as FCC Part 15J, Class B.
Rated voltage (max.):
250 VAC
Rated current:
6VN1
6A
10A
10VN1
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current
Rating
6VN1
Frequency-MHz
.01 .05 .1 .15 .5
1
5
10
20 28 34 58 54 53 53
44 55 75 70 70 70
30
43
55
Electrical Schematics
6
8
10VN1
8
6VN1 Model
LINE
LOAD
Line-to-line in 50 ohm circuit
Current
Rating
6VN1
Frequency-MHz
.01 .05 .1 .15 .5
1
5
10
14 41 52 66 77 72 60
35 45 72 70 72 75
30
60
70
6
6
10VN1
6
10VN1 Model
LINE
LOAD
Resistor location for reference only.
80
Catalog 1654001
Revised 05-07
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Germany:
49-89-6089-0
