Parameter  
					Min Typ Max  
					Units  
					Condition  
					45  
					55  
					ꢀ
					Duty cycle  
					Jitter (rms)  
					@ 50ꢀ Vdd  
					10  
					0.5  
					ps  
					ps  
					BW = 10Hz to 20 MHz  
					BW = 12KHz to 20 MHz  
					40  
					LVDS  
					140  
					ps  
					10,000 Samples - Rising edge  
					Period Jitter (pk-pk)  
					Signal  
					60  
					100  
					1.2  
					1.4  
					330  
					1.2  
					ohm  
					VDC  
					VDC  
					mVpeak  
					V
					Between outputs  
					Load  
					Signal Level (Vol)  
					Signal Level (Voh)  
					Di$erential Voltage (Vod)  
					Common Mode (O$set) Voltage (Vos)  
					Start-up Time  
					240  
					460  
					1.375  
					10  
					1.125  
					ms  
					600  
					1000  
					55  
					ps  
					measured @ 20ꢀ to 80ꢀ of Vod  
					@ 50ꢀ of Vod  
					Rise \ Fall Time  
					45  
					ꢀ
					Duty cycle  
					5
					1
					ps  
					ps  
					BW = 10Hz to 20 MHz  
					BW = 12KHz to 20 MHz  
					Jitter (rms)  
					40  
					ps  
					10,000 Samples - Rising edge  
					Period Jitter (pk-pk)  
					Absolute Maximum Ratings  
					7.0  
					V
					with Vs=5.0VDC and 3.3 VDC  
					Supply voltage (Vs)  
					-55  
					-62  
					+125  
					+125  
					°C  
					°C  
					Operable temperature range  
					Storage temperature range  
					Additional Parameters  
					Vectron Veri&cation  
					Screening  
					Class B, MIL-PRF-55310, Rev.D  
					Logic “0“ input = Outputs disabled (Tri-state)  
					Logic “1“ or !oating input = Outputs enabled)  
					Standard (All outputs)  
					Output Enable  
					Logic “0“ or !oating input = Outputs enabled  
					Logic “1“ input = Outputs disabled (Tri-state)  
					Weight  
					< 2 grams  
					Processing ꢁ Packing  
					Handling ꢁ processing note  
					Standard Environmentals  
					Vibration  
					MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz)  
					Shock  
					MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth)  
					MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane)  
					MIL-STD-883, Method 1010, Condition B  
					Acceleration  
					Temperature Cycling  
					Thermal Shock  
					Solderability  
					MIL-STD-883, Method 107, Condition B  
					MIL-STD-202, Method 208  
					Leak Test (Fine and Gross)  
					MIL-STD-883, Method 1014, Condition A1 and C1  
					Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com