AZ769  
					25 AMP MINIATURE  
					POWER RELAY  
					FEATURES  
					• Low cost  
					• 25 Amp switching  
					• 80 Amp inrush current  
					• Quick connect and PCB terminals  
					• Flux tight construction  
					• UL, CUR file E44211  
					• TÜV file R50069399  
					CONTACTS  
					GENERAL DATA  
					Arrangement  
					SPST (1 Form A)  
					Resistive load:  
					Life Expectancy  
					Mechanical  
					Electrical  
					Minimum operations  
					2 x 106  
					1 x 105 at 25 A 250 VAC Res.  
					Ratings  
					Max. switched power: 600 W or 6925 VA  
					Max. switched current: 25 A  
					Operate Time (typical) 20 ms at nominal coil voltage  
					Max. switched voltage: 150 VDC* or 400 VAC  
					Release Time (typical) 10 ms at nominal coil voltage  
					* Note: If switching voltage is greater than 30 VDC,  
					special precautions must be taken.  
					Please contact the factory.  
					(with no coil suppression)  
					Dielectric Strength  
					4500 Vrms coil to contact  
					(at sea level for 1 min.) 1500 Vrms between open contacts  
					Rated Load  
					UL, CUR  
					10,000 V surge contact to coil  
					25 A at 277 VAC resistive 100k cycles [1] [2]  
					1 HP at 120 VAC, 100k cycles [1] [2]  
					2 HP at 240 VAC, 100k cycles [2]  
					Insulation  
					Resistance  
					1000 megohms min. at 20°C, 500 VDC,  
					50% RH  
					2 HP at 240 VAC, 30k cycles [1]  
					Dropout  
					Greater than 10% of nominal coil voltage  
					TÜV  
					25 A at 250 VAC resistive [1]  
					Ambient Temperature At nominal coil voltage  
					Operating  
					Storage  
					-40°C (-40°F) to 70°C (158°F)  
					-40°C (-40°F) to 105°C (221°F)  
					Material  
					Resistance  
					Silver cadmium oxide [1] or silver tin oxide [2]  
					< 50 milliohms initially  
					Vibration  
					Shock  
					0.062" (1.5 mm) DA at 10–55 Hz  
					(24 V, 1 A voltage drop method)  
					Operating  
					20 g, 11 ms, 1/2 sine (no false operation)  
					COIL  
					Non-Operating 100 g, 11 ms, 1/2 sine (no damage)  
					Power  
					Enclosure  
					Terminals  
					P.B.T. polyester  
					At Pickup Voltage  
					(typical)  
					441 mW  
					Tinned copper alloy  
					P.C. & quick connect  
					Note: Allow suitable slack on leads when wiring  
					and do not subject the terminals to  
					excessive force.  
					Max. Continuous  
					Dissipation  
					2.25 W at 20°C (68°F) ambient  
					Temperature Rise  
					Temperature  
					45°C (81°F) at nominal coil voltage  
					Max. 130°C (266°F)  
					Max. Solder Temp.  
					Max. Solder Time  
					Weight  
					270°C (518°F)  
					5 seconds  
					23 grams  
					NOTES  
					Packing unit in pcs  
					50 per plastic tray / 500 per carton box  
					1. All values at 20°C (68°F).  
					2. Relay may pull in with less than “Must Operate” value.  
					3. Specifications subject to change without notice.  
					ZETTLER electronics GmbH  
					Junkersstrasse 3, D-82178 Puchheim, Germany  
					Tel. +49 89 800 97 0  
					Fax +49 89 800 97 200  
					office@ZETTLERelectronics.com  
					www.ZETTLERelectronics.com  
					2005-12-05