AZ830
POLARIZED DIP RELAY
SINGLE SIDE STABLE
FEATURES
• Low profile for compact board spacing
• DC coils to 48 VDC
• High sensitivity, 100 mW pickup
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Life expectancy to 100 million operations
• High switching capacity, 60 W, 125 VA
• Fits standard 16 pin IC socket
• Epoxy sealed
• UL file E43203 (UL1950); CSA file LR 88413
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 108
CONTACTS
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
(see table for additional figures)
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Operate Time (typical) 3 ms at nominal coil voltage
Ratings
Resistive load:
Release Time (typical) 2 ms at nominal coil voltage
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
(with no coil suppression)
Max. switched voltage: 250 VDC or 300 VAC
Max. carry current: 3A
Capacitance
Contact to contact: 1.0 pF
Contact set to contact: 1.0 pF
Contact to coil: 2.0 pF
Rated Load
UL
2 A at 30 VDC
1 A at 120 VAC
Bounce (typical)
At 10 mA contact current
1.5 ms at operate N.O. side
2.5 ms at operate N.C. side
Material
Silver alloy, gold clad. Silver palladium, gold clad
available upon request (not recommended for
current greater than 1 Amp).
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Resistance
< 50 milliohms initially
COIL
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Power
At Pickup Voltage
(typical)
Standard coil: 200 mW
Sensitive coil: 100 mW
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Max. Continuous
Dissipation
1.0 W at 20°C (68°F)
0.9 W at 40°C (104°F)
Operating
Storage
Standard: -40°C (-40°F) to 70°C (158°F)
Sensitive: -40°C (-40°F) to 85°C (185°F)
Both: -40°C (-40°F) to 105°C (221°F)
Temperature Rise
Standard: 38°C (68°F) at nominal coil voltage
Sensitive: 21°C (38°F) at nominal coil voltage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
40 g
Temperature
Max. 115°C (239°F)
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
NOTES
Terminals
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
Max. Immersion Time 30 seconds
6. Specifications subject to change without notice.
Weight
5 grams
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-08-14
