AZ946  
					MINIATURE  
					PC BOARD RELAY  
					FEATURES  
					• Subminiature size  
					• High sensitivity, 288 mW pick up  
					• Coils to 24 VDC  
					• Epoxy sealed for automatic wave soldering  
					• Contacts rated at 1 or 5 Amps  
					• Life expectancy to 20 million operations  
					• Extremely low cost  
					• UL, CUR file E43203  
					CONTACTS  
					GENERAL DATA  
					Arrangement  
					2 Form C (DPDT)  
					Noninductive load:  
					Life Expectancy  
					Mechanical  
					Electrical  
					Minimum operations  
					2 x 107  
					Max. Ratings  
					Light Duty  
					1 x 105 (at rated load)  
					Max. switched power: 30 W or 277 VA  
					Max. switched current: 1 A  
					Operate Time (typical) 5 ms at nominal coil voltage  
					Max. switched voltage: 150* VDC or 300 VAC  
					UL Rating: 1 A at 30 VDC resistive  
					1 A at 277 VAC general use  
					Release Time (typical) 5 ms at nominal coil voltage  
					(with no coil suppression)  
					(100k cycles)  
					Dielectric Strength  
					1000 Vrms coil to contact  
					(at sea level for 1 min.)  
					750 Vrms between open contacts  
					1000 Vrms contact set to contact set  
					Medium Duty  
					Max. switched power:  
					150 W or 1385 VA  
					Max. switched current: 5 A  
					Max. switched voltage: 150* VDC or 300 VAC  
					UL Rating: 5 A at 30 VDC resistive  
					5 A at 277 VAC general use  
					(100k cycles)  
					Insulation  
					Resistance  
					100 megohms min. at 20°C, 500 VDC,  
					50% RH  
					Dropout  
					Greater than 10% of nominal coil voltage  
					* If switching voltage is greater than 30 VDC  
					special precautions must be taken. Please  
					contact the factory  
					Ambient Temperature At nominal coil voltage  
					Operating  
					-10°C (14°F) to 60°C (140°F) standard  
					-10°C (14°F) to 70°C (158°F) sensitive  
					-10°C (14°F) to 105°C (221°F)  
					Storage  
					Material  
					Light Duty: Silver, gold plated  
					Medium Duty: Silver Cadmium Oxide, gold plated  
					Vibration  
					0.062" (1.5 mm) DA at 5–55 Hz  
					10 g  
					Shock  
					Resistance  
					Light Duty: 100 milliohms max. initially  
					Medium Duty: 100 milliohms max.  
					(6 V 1 A method)  
					Enclosure  
					P.B.T. polyester  
					Tinned copper alloy, P.C.  
					270°C (518°F)  
					Terminals  
					COIL  
					Max. Solder Temp.  
					Max. Solder Time  
					Max.Solvent Temp.  
					5 seconds  
					Power  
					At Pickup Voltage  
					(typical)  
					384 mW standard  
					288 mW sensitive  
					80°C (176°F)  
					Max. Immersion Time 30 seconds  
					Max. Continuous  
					Dissipation  
					1.2 W at 20°C (68°F)  
					Weight  
					12 grams  
					Temperature Rise  
					35°C (63°F) standard  
					30°C (54°F) sensitive  
					Max. Temperature  
					105°C (221°F)  
					NOTES  
					1. All values at 20°C (68°F).  
					2. Relay may pull in with less than “Must Operate” value.  
					3. Specifications subject to change without notice.  
					4. Unsealed relays should not be dipped cleaned  
					ZETTLER electronics GmbH  
					Junkersstrasse 3, D-82178 Puchheim, Germany  
					Tel. +49 89 800 97 0  
					Fax +49 89 800 97 200  
					office@ZETTLERelectronics.com  
					www.ZETTLERelectronics.com  
					2003-06-16