AZ9431
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• High performance
• Low seated height
• 6 kV surge version available
• Flux tight and sealed versions available
• Class B insulation (130°C) standard, Class F (155°C) available
• UL, CUR file E43203
CONTACTS
Arrangement
SPST N.O. (1 Form A)
SPDT (1 Form C)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Ratings
Medium Duty
1 x 106
Max. switched power: 240 W or 1200 VA
Max. switched current: 10 A
1 x 105 at 10 A 120 VAC res.
Max. switched voltage: 150* VDC or 300 VAC
Operate Time
Release Time
10 ms max.
Heavy Duty
Max. switched power: 360 W or 2500 VA
Max. switched current: 15 A
Max. switched voltage: 150* VDC or 300 VAC
5 ms max.
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
3000 Vrms contact to coil (6 kV version)
1500 Vrms contact to coil
1000 Vrms across contacts
UL/CUR Ratings
Medium Duty
10 A at 120 VAC, General Use
10 A at 24 VDC, General Use
10 A at 250 VAC, General Use
15 A at 120 VAC, General Use
15 A at 24 VDC, General Use
Insulation Resistance 100 megohms min. at 500 VDC,
Heavy Duty
50% RH
Dropout
Greater than 10% of nominal coil voltage
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Ambient Temperature At nominal coil voltage
Operating -40°C(-40°F) to 100°C(212°F)
Material
Medium Duty: Silver cadmium oxide
Heavy Duty: Silver tin oxide
Storage
-40°C(-40°F) to 155°C(311°F)
0.062" DA at 10–55 Hz
Vibration
Shock
Resistance
< 100 milliohms initially
(24 V, 1 A method)
10 g
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
COIL
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Power
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.7 W at 20°C (68°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 10 g
Temperature Rise
(at nominal coil voltage)
22°C (40°F)
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
5/26/05W
