AZ7671
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
GENERAL DATA
• Class B insulation standard
• Epoxy sealed version available
• 10 Amp switching
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
• UL, CUR file E44211
Operate Time (typical) 8 ms at nominal coil voltage
CONTACTS
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Ratings
Resistive load:
Max. switched power: 150 W
1250 VA
Max. switched current: 10 A
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Max. switched voltage:30* VDC or 277 VAC
Ambient Temperature At nominal coil voltage
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–50 Hz
100 g damage for 11 ms 1/2 sine pulse
P.B.T. polyester
Rated Load
UL, CUR
10 A at 125 VAC
5 A at 250 VAC
1/4 HP at 120/240/277 VAC
TV-5 at 120 VAC
24 VA at 24 VAC
Vibration
Shock
Enclosure
125 VA at 120/240/277 VAC
C150 at 120 VAC
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
TUV
5A at 250 VAC
5A at 28 VDC
5 seconds
80°C (176°F)
Material
Silver cadmium oxide
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
Max. Immersion Time 30 seconds
Weight
6 grams
COIL
NOTES
Power
1. All values at 20°C (68°F).
At Pickup Voltage
(typical)
253 mW standard
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
41°C (74°F) at nominal coil voltage, standard
Temperature Rise
Temperature
Max. 105°C (221°F)
4/23/10
