AZ7695
25 AMP MINIATURE
POWER RELAY
FEATURES
• Low cost
• 25 Amp switching
• 80 Amp inrush current
• Short Circuit Rating 5000 A rms, 250 VAC
• Quick connect and PCB terminals
• Flux tight construction
Class F insulation system available
•
• UL, CUR file E44211
• TUV 50251020
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
CONTACTS
1 x 105 at 25 A 250 VAC Res.
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Operate Time (max)
Release Time (max)
20 ms at nominal coil voltage
Max. switched power: 6250 VA
Max. switched current: 25 A
Max. switched voltage: 250 VAC, 30 VDC
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5,000 VAC coil to contact
(at sea level for 1 min.) 1,000 VAC between open contacts
Rated Load
UL, CUR
25A at 250 VAC/30 VDC Resistive, 100k ops, 850C
25A at 250 VAC General use, 100k ops, 850C
2 HP at 240 VAC Motor, 100k ops, 850C
10,000 V surge contact to coil
Insulation Resistance 1000 megohms min. at 500 VDC
25 FLA / 85 LRA at 250 VAC, 100k ops, 850C
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
TUV
16A/20A/25A 250VAC; cos phi=0, 95 100k ops, 85°C
16A/20A/25A 30VDC; 100k ops, 85°C
16A/20A/25A 250VAC; cos phi=0, 75 100k ops, 85°C
NO: 70A/80A for 0,07s 250VAC; cos phi=0, 65
100k ops, 85°C
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (266°F)
Vibration
0.059" DA at 10–55 Hz
Shock
NC: 25A for 4, 93s 250VAC; cos phi=0, 95
100k ops, 85°C
Operating
10 g
Non-Operating 100 g
Material
silver tin oxide
Enclosure
Terminals
P.B.T. polyester
Resistance
< 100 milliohms initially
(6V, 1 A voltage drop method)
Tinned copper alloy
P.C. & quick connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
COIL
Max. Solder Temp.
Max. Solder Time
Weight
270°C (518°F)
5 seconds
Power
At Pickup Voltage
(typical)
441 mW
23 grams
Max. Continuous
Dissipation
1.5 W at 20°C (73.4°F) ambient
Temperature Rise
Temperature
60°C (140°F) at nominal coil voltage
NOTES
Max. 105°C (221°F)
1. All values at 23°C (68°F).
Max. 155°C (311°F) Class F
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
3/17/2015
