TZY2K450AC01,PDF,TZY2K450AC01 PDF资料,Datasheet,下载TZY2K450AC01技术资料

Ceramic Trimmer Capacitors

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

EU RoHS Compliant

s

!LL THE PRODUCTS IN THIS CATALOG COMPLY WITH %5 2O(3ꢀ

%5 2O(3 IS ꢁTHE %UROPEAN $IRECTIVE ꢂꢃꢄꢄꢅꢆꢇꢅ%5 ON THE 2ESTRICTION OF THE 5SE

s

OF #ERTAIN (AZARDOUS 3UBSTANCES IN %LECTRICAL AND %LECTRONIC %QUIPMENTꢀꢁ

For MORE DETAILSꢈ PLEASE REFEr To Our WEBSITE 'MurATAgS APProAcH FoR %5 2O(3'

ꢉHTTPꢊꢅꢅWWWꢀMURATAꢀCOMꢅENꢋEUꢅSUPPORTꢅCOMPLIANCEꢅROHSꢌꢀ

s

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

1

Part Numbering

p2

p3

Contents

Selection Guide of Ceramic Trimmer Capacitors

Product specifications are as of May 2014.

1

2

3

4

5

TZR1 Series

p4

p8

Bluetoothr is a registered trademark

or trademark of Bluetooth SIG, Inc.

in the United States and other countries.

2

TZY2 Series

3

TZC3 Series

p13

p18

p21

4

TZW4 Series

5

TZB4 Series

Packaging

p26

p28

p29

Recommended Adjustment Tools

Qualified Standards

Please check the MURATA home page (http://www.murata.com/)

if you cannot find the part number in the catalog.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

o Part Numbering

Ceramic Trimmer Capacitors

(Part Number)

TZ Y2

R

200

A

C01 R00

q

w

e

r

t

y

u

qProduct ID

tTerminal Shape

Product ID

Code

A

Terminal Shape

Top Adjustment: TZR1, TZY2, TZC3, TZW4, TZB4

Top Adjustment: TZB4

TZ

Trimmer Capacitors

B

wSeries/Terminal

Please refer to dimensions for terminal details.

Code

B4

Series/Terminal

yIndividual Specifications

4mm Size SMD Type

3mm Size SMD Type

2mm Size SMD Type

1mm Size SMD Type

W4

C3

Code

001

Individual Specifications

TZR1, TZW4 Standard Type

TZY2 Standard Type

Y2

C01

110

R1

TZC3 Standard Type

A10

B10

TZB4 No-cover Film Standard Type

TZB4 with Cover Film Standard Type

eTemperature Characteristics

Code

Temperature Characteristics

NP0ppm/°C

uPackaging

Z

R

K

P

N750ppm/°C

Code

B00

Packaging

Bulk

N1000ppm/°C

N1200ppm/°C

R00

Reel (Taping ø180mm)

Reel (Taping ø330mm)

Please refer to ratings for tolerance of temperature characteristics.

R01*

* TZB4 only.

rMaximum Capacitance

Expressed by three-digit alphanumerics. The unit is pico-farad

(pF). The first and second figures are significant digits, and the

third figure expresses the number of zeros that follow the two

numbers. If there is a decimal point, it is expressed by the capital

letter "R". In this case, all figures are significant digits.

2

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Selection Guide of Ceramic Trimmer Capacitors

Mounting Method?

Surface Mount

Reflow

Flow

Height 0.90mm max.

Height 1.7mm max.

Height 3.2mm max.

High Frequency Power

TZB4_AB

TZR1

TZC3

Height 2.6mm max.

4.0(W) x 4.5(L)

(with cover film)

1.5(W) x 1.7(L)

3.2(W) x 4.5(L)

TZW4

Height 1.25mm max.

Height 3.2mm max.

4.2(W) x 5.2(L)

TZB4_BB

4.0(W) x 4.5(L)

(with cover film)

TZY2

TZB4_AA

2.5(W) x 3.2(L)

4.0(W) x 4.5(L)

TZB4_BB

4.0(W) x 4.5(L)

All Ceramic Trimmer Capacitor products comply with RoHS and ELV.

3

• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.

• This catalog has only tyꢀical sꢀeciﬁcations. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀeciﬁcations or transact the aꢀꢀroval sheet for ꢀroduct sꢀeciﬁcations before ordering.

!Note

T1±E.ꢀdf

Mar.12,2015

1

Ceramic Trimmer Capacitors

TZR1 Series

1.7

(Depth;0.15)

Features

0.2

c

1. Ultra-spall and thin with external dipensions

of 1.5(W)x1.7(L)x0.85(H)pp

(80% less in volupe than the current ꢀroduct).

2. Unique construction with no ꢀlastic paterial

ꢀrovides suꢀerior soldering heat resistance to

paintain excellent characteristic ꢀerforpance

after reﬂow soldering.

0.35

±. Suitable for high frequency circuit due to high

self-resonant frequency (6.2GHz of TZR1Z010 at

1.0ꢀF setting).

Tolerance: 0.1

in mm

(

)

Applications

c

1. Bluetoothr

2. °rystal oscillators

±. °rystal ﬁlters

4. Hand radios

5. Miniature tuner ꢀacks (FM Radio, TV)

6. Repote keyless entry systeps

C min. (max.)

(pF)

C max.

(pF)

Part Number

TC

Q

Rated Voltage

Withstanding Voltage

TZR1Z010A001

TZR1Z1R5A001

TZR1Z040A001

TZR1R080A001

0.55

0.7

1.5

±.0

1.0 +100/-0%

1.5 +100/-0%

NP0±±00ꢀꢀp/ꢁ°

NP0±500ꢀꢀp/ꢁ°

N750±500ꢀꢀp/ꢁ°

200pin. at 200MHz, °pax.

±00pin. at 1MHz, °pax.

25Vdc

55Vdc

4.0 +100/-0%

8.0 +100/-0%

Insulation Resistance: 10000M ohp

Torque: 0.1 to 1.0pNp

Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°

Construction

c

Cover

Metal Rotor

Monolithic

Stator

4

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Characteristics

c

1

TZR1Z010

TZR1Z1R5

Z010 (NP0±±00 ꢀꢀpm/Cꢁ

Z1R5 (NP0±±00 ꢀꢀpm/Cꢁ

8

6

4

2

8

6

4

2

–25

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

TZR1Z040

TZR1R080

Z040 (NP0±500 ꢀꢀpm/Cꢁ

R080 (N750±500 ꢀꢀpm/Cꢁ

8

6

4

8

6

4

2

–25

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

Frequency Characteristics

c

TZR1Z010

TZR1Z1R5

Z010

Z1R5

10000

1000

100

1000

100

0.55ꢀF set

0.7ꢀF set

Q

10

1

10

1

1.0ꢀF set

1.5ꢀF set

0

2

4

6

8

10

0

2

4

6

8

10

Frequency (GHzꢁ

TZR1Z040

TZR1R080

Z040

R080

1000

100

1000

100

1000

100

10

1

Q

10

1

10

500 1000 1500 2000 2500

Frequency (MHzꢁ

500

1000

Frequency (MHzꢁ

1500

2000

5

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Land Pattern

c

1

2.2

1.2

Tolerance: 0.1

in mm

Temperature Proﬁle

c

Reflow Soldering Profile

qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)

wSoldering profile for Eutectic solder (63Sn/37Pb)

(Limit profile: refer to q)

T5

T3

T4

T2

T3

T2

t2

T1

t2

t3

Limit Profile

T1

Standard Profile

t1

time (s)

Standard Profile

Heating

Standard Profile

Heating

Peak

temperature

(T3)

Peak

temperature

(T3)

Pre-heating

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

150 to 180°C 60 to 120sec. 220°C

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

30 to 60sec. 245 3°C

2 times

150°C 60 to 120sec. 183°C

30sec. 230 +5/-0°C 1 time

Limit Profile

Heating

Temp. (T4) Time (t3)

Peak

temperature

(T5)

Pre-heating

Temp. (T1) Time (t1)

Cycle

of reflow

150 to 180°C 60 to 120sec. 230°C

30 to 50sec. 260 +5/-0°C 2 times

Soldering Iron

Standard Profile

Temperature of soldering iron tip

Soldering time

Soldering iron power output

Cycle of soldering iron

350 10°C

3sec. max.

30W max.

1 time

Notice (Storage and Operating Conditions)

c

1. Do not use the trimmer capacitor under atmosphere

of RTV silicone rubber (Room Temperature

Vulcanizing Silicone Rubber) except Acetone

liberating silicone sealant.

6. Do not use the trimmer capacitor under the

conditions listed below.

(1) Corrosive gasses atmosphere

(ex. Chlorine gas, Hydrogen sulﬁde gas,

Ammonia gas, Sulfuric acid gas, Nitric oxide gas,

etc.)

2. Before using trimmer capacitors, please store under

the conditions of -10 to +40°C and 30 to

85%RH.

(2) In liquid (ex. water, oil, medical liquid,

organic solvent, etc.)

3. Do not store in or near corrosive gasses.

4. Use within 6 months of delivery.

(3) Dusty / dirty atmosphere

5. Do not store under direct sunlight.

(4) Direct sunlight

(5) Static voltage or electric/magnetic ﬁelds

(6) Direct sea breeze

(7) Other variations of the above

6

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Notice (Soldering and Mounting)

1. Soldering

(1) TZR1 series can be soldered by reﬂow soldering

method and soldering iron. Do not use ﬂow

soldering method (dipping).

c

1

(6) Our recommended chlorine content of solder is

as follows.

(a) Solder paste: 0.2wt% max.

(b) String solder: 0.5wt% max.

(7) Do not use water-soluble ﬂux (for water

cleaning). To prevent the deterioration of

trimmer capacitor characteristics, apply ﬂux

only to terminals.

(2) Soldering conditions

Refer to the temperature proﬁle.

If the soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer capacitor may deviate from the speciﬁed

characteristics.

2. Mounting

(1) Do not apply excessive force (preferably 5.0 N

[Ref: 500gf] max.), when the trimmer capacitor

is mounted on the PCB.

(3) The amount of solder is critical.

(4) The thickness of solder paste should be printed

from 100 micro m to 150 micro m and the dimension

of land pattern should be Murata's standard land

pattern used at reﬂow soldering.

(2) Do not warp and/or bend PCB to protect trimmer

capacitor from breaking.

(3) Use a pick-up nozzle of a suitable dimension.

(1.6mm external diameter and 0.8mm bore

diameter.)

Insufﬁcient amounts of solder can lead to

insufﬁcient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals or contact failure due to

ﬂux wicking up.

3. Cleaning

This product cannot be cleaned because of open

construction.

(5) When using soldering iron, the diameter of the

string solder shall be less than 0.5mm. The

string solder shall be applied to the lower

part of the terminal only. Do not apply ﬂux

except to the terminals. Excessive amounts of

solder and/or applying solder to the upper part

of the terminal may cause ﬁxed metal rotor or

contact failure due to ﬂux invasion into

the movable part and/or the contact point. The

soldering iron should not come in contact with

the monolithic stator of the trimmer capacitor.

If such contact does occur, the trimmer

capacitor may be damaged.

4. Other

Note the polarity of the trimmer capacitor to

minimize inﬂuence by stray capacitance.

(Refer to the dimensions concerning the polarity.)

Notice (Handling)

c

1. Use suitable screwdrivers that ﬁt comfortably in

3. Do not apply adhesive, lock paints, or any other

substances to the trimmer capacitor to secure the

rotor position. They may cause corrosion or

electrical contact problems.

driver slot.

*Recommended screwdriver for manual adjustment

MURATA: KMDR160

2. When adjusting with a screwdriver, do not apply

excessive force (preferably 0.5 N [Ref: 50gf] max.)

to minimize capacitance drift. Excessive force applied

to the screwdriver slot may cause deformation of the

products.

Notice (Other)

c

Before using trimmer capacitors, please test after

assembly in your particular mass production system.

7

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T1±E.pdf

Mar.12,2015

Ceramic Trimmer Capacitors

TZY2 Series

3.2±±.2

±.45

2

c Features

1. Small and thin size with external dimensions

of 2.5(W)x±.2(L)x1.25max.(H)mm.

2. New shape of cover can improve the ﬂux invasion

compared with current products.

±. Improvement of the adhesion between rotor and

stator leads to superior stability.

±.5

4. Unique construction with no plastic material

provides superior soldering heat resistance to

maintain excellent characteristic performance

after reﬂow soldering.

Tolerance: ±±.1

in mm

(

)

5. Suitable for high frequency circuit due to high

self-resonant frequency (4.8GHz of TZY2Z010 at

1.0pF setting).

Applications

c

1. Crystal oscillators

2. Crystal ﬁlters

±. Stylus pen

9. Remote keyless entry systems

10. W-LAN

11. Radar detectors

4. Cordless telephones 12. Compact radios

5. PHS

1±. DVD

6. Hand radios

7. Cellular telephones

8. Watches

14. Burglarproof devices

15. Headphone stereos

C min. (max.)

C max.

(pF)

Part Number

TC

Q

Rated Voltage Withstanding Voltage

(pF)

TZY2Z010AC01

TZY2Z2R5AC01

TZY2Z030AC01

TZY2Z060AC01

TZY2Z100AC01

TZY2R200AC01

TZY2R250AC01

TZY2K450AC01

0.6

1.0

1.5

2.5

±.0

4.5

5.5

8.0

1.0 +100/-0%

2.5 +100/-0%

NP0±±00ppm/°C

N750±500ppm/°C

N1000±500ppm/°C

200min. at 200MHz, Cmax.

±00min. at 1MHz, Cmax.

500min. at 1MHz, Cmax.

±00min. at 1MHz, Cmax.

25Vdc

55Vdc

±.0 +100/-0%

6.0 +100/-0%

10.0 +100/-0%

20.0 +100/-0%

25.0 +100/-0%

45.0 +100/-0%

Torque: 0.7 to 4.9mNm

Insulation Resistance: 10000M ohm

Operating Temperature Range: -25 to +85°C

Construction

c

Cover

Metal Rotor

Monolithic

Stator

8

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Characteristics

c

TZY2Z010

TZY2Z2R5

Z010 (NP0±±00 ꢀꢀpm/Cꢁ

Z2R5 (NP0±±00 ꢀꢀpm/Cꢁ

8

6

4

2

8

6

4

2

–25

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

2

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

TZY2Z030

TZY2Z060

Z0±0 (NP0±±00 ꢀꢀpm/Cꢁ

Z060 (NP0±±00 ꢀꢀpm/Cꢁ

8

6

4

8

6

4

2

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

TZY2Z100

TZY2R200

Z100 (NP0±±00 ꢀꢀpm/Cꢁ

R200 (N750±500 ꢀꢀpm/Cꢁ

8

6

4

8

6

4

2

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

TZY2R250

TZY2K450

R250 (N750±500 ꢀꢀpm/Cꢁ

K450 (N1000±500 ꢀꢀpm/Cꢁ

8

6

4

8

6

4

2

–25

20

85

Tepꢀ.(/Cꢁ

–25

20

85

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

9

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Frequency Characteristics

c

TZY2Z010

TZY2Z100

Z010

Z100

1000

2

100

Q

0.5pF set

10

1.0pF set

1

0

2

4

6

8

200

400

600

800

1000

Frequency (GHz)

Frequency (MHz)

TZY2R200

TZY2K450

R200

K450

1000

100

10

1

100

Q

10

1

200

400

600

800

1000

200

400

600

800

Frequency (MHz)

Land Pattern

c

4.0

2.4

Tolerance: 0.1

in mm

10

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Proﬁle

c

Reflow Soldering Profile

qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)

wSoldering profile for Eutectic solder (63Sn/37Pb)

(Limit profile: refer to q)

T5

T3

T4

T2

T3

T2

t2

T1

t2

t3

Limit Profile

T1

Standard Profile

2

t1

time (s)

Standard Profile

Heating

Standard Profile

Heating

Peak

temperature

(T3)

Peak

temperature

(T3)

Pre-heating

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

150 to 180°C 60 to 120sec. 220°C

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

30 to 60sec. 245 3°C

2 times

150°C 60 to 120sec. 183°C

30sec. 230 +5/-0°C 1 time

Limit Profile

Heating

Temp. (T4) Time (t3)

Peak

temperature

(T5)

Pre-heating

Temp. (T1) Time (t1)

Cycle

of reflow

150 to 180°C 60 to 120sec. 230°C

30 to 50sec. 260 +5/-0°C 2 times

Soldering Iron

Standard Profile

Temperature of soldering iron tip

Soldering time

Soldering iron power output

Cycle of soldering iron

350 10°C

3sec. max.

30W max.

1 time

Notice (Storage and Operating Conditions)

c

1. Do not use the trimmer capacitor under atmosphere

of RTV silicone rubber (Room Temperature

Vulcanizing Silicone Rubber) except Acetone

liberating silicone sealant.

6. Do not use the trimmer capacitor under the

conditions listed below.

(1) Corrosive gasses atmosphere

(ex. Chlorine gas, Hydrogen sulﬁde gas,

Ammonia gas, Sulfuric acid gas, Nitric oxide gas,

etc.)

2. Before using trimmer capacitors, please store under

the conditions of -10 to +40°C and 30 to

85%RH.

(2) In liquid (ex. water, oil, medical liquid,

organic solvent, etc.)

3. Do not store in or near corrosive gasses.

4. Use within 6 months of delivery.

(3) Dusty / dirty atmosphere

5. Do not store under direct sunlight.

(4) Direct sunlight

(5) Static voltage or electric/magnetic ﬁelds

(6) Direct sea breeze

(7) Other variations of the above

11

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Notice (Soldering and Mounting)

c

1. Soldering

(6) Our recommended chlorine content of solder is

as follows.

(1) TZY2 series can be soldered by reﬂow soldering

method and soldering iron. Do not use ﬂow

soldering method (dipping).

(a) Solder paste: 0.2wt% max.

(b) String solder: 0.5wt% max.

(7) Do not use water-soluble ﬂux (for water

cleaning). To prevent the deterioration of

trimmer capacitor characteristics, apply ﬂux

only to terminals.

(2) Soldering conditions

Refer to the temperature proﬁle.

If the soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer capacitor may deviate from the speciﬁed

characteristics.

2

2. Mounting

(1) Do not apply excessive force (preferably 5.0 N

[Ref: 500gf] max.), when the trimmer capacitor

is mounted on the PCB.

(3) The amount of solder is critical.

(4) The thickness of solder paste should be printed

from 120 micro m to 170 micro m and the dimension

of land pattern should be Murata's standard land

pattern used at reﬂow soldering.

(2) Do not warp and/or bend PCB to protect trimmer

capacitor from breakage.

(3) Use a pick-up nozzle of a suitable dimension.

(2.5mm external diameter and 1.2mm bore

diameter.)

Insufﬁcient amounts of solder can lead to

insufﬁcient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals or contact failure due to

ﬂux wicking up.

3. Cleaning

This product cannot be cleaned because of open

construction.

(5) When using soldering iron, the diameter of the

string solder shall be less than 0.5mm. The

string solder shall be applied to the lower

part of the terminal only. Do not apply ﬂux

except to the terminals. Excessive amounts of

solder and/or applying solder to the upper part

of the terminal may cause ﬁxed metal rotor or

contact failure due to ﬂux invasion into

the movable part and/or the contact point. The

soldering iron should not come in contact with

the monolithic stator of the trimmer capacitor.

If such contact does occur, the trimmer

capacitor may be damaged.

4. Other

Note the polarity of the trimmer capacitor to

minimize inﬂuence by stray capacitance.

(Refer to the dimensions concerning the polarity.)

Notice (Handling)

c

1. Use suitable screwdrivers that ﬁt comfortably in

2. When adjusting with a screwdriver, do not apply

excessive force (preferably 1.0 N [Ref: 100gf] max.)

to minimize capacitance drift. Excessive force applied

to the screwdriver slot may cause deformation of the

products.

driver slot.

(1) Recommended screwdriver for manual adjustment

MURATA: KMDR060

(2) Recommended screwdriver bit for automatic

adjustment

3. Do not apply adhesive, lock paints, or any other

substances to the trimmer capacitor to secure the

rotor position. They may cause corrosion or

electrical contact problems.

MURATA: KMBT060

Notice (Other)

c

Before using trimmer capacitor, please test after

assembly in your particular mass production system.

12

• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.

• This catalog has only tyꢀical sꢀeciﬁcations. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀeciﬁcations or transact the aꢀꢀroval sheet for ꢀroduct sꢀeciﬁcations before ordering.

!Note

T13E.ꢀdf

Mar.12,2015

Ceramic Trimmer Capacitors

TZC3 Series

Features

c

1. Spall size with external dipension of

±05

205 dia0

405

3.2(W)x4.5(L)x1.6(H)pp.

2. °olor coded stator ꢀerpits easy identiﬁcation of

caꢀacitance and reduces pounting errors.

3. °an be adjusted with conventional adjustpent tools

having a thickness of 0.5pp.

3

4. Designed for autopatic ꢀlacepent in surface pount

aꢀꢀlications.

Tolerance: ±±0.

in mm

5. Heat resistant resin withstands reﬂow soldering

tepꢀeratures.

±06

Applications

c

1. °opꢀact radios

2. Headꢀhones

3. Stylus ꢀen

4. Portable radio equiꢀpent

5. Hybrid I°s

6. °ellular teleꢀhones

7. °ordless teleꢀhones

8. Repote keyless entry systeps

C min. (max.)

(pF)

C max.

(pF)

Part Number

TC

Q

Rated Voltage Withstanding Voltage Stator/Case Color

TZC3Z030A110

TZC3Z060A110

TZC3R100A110

TZC3P200A110

TZC3P300A110

1.4

2.0

3.0

5.0

6.5

3.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.

6.0 +50/-0% NP0 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.

10.0 +50/-0% N750 300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.

20.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.

30.0 +50/-0% N1200 500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.

100Vdc

220Vdc

Brown

Blue

White

Red

Green

Insulation Resistance: 10000M ohp

Torque: 1.5 to 9.8pNp

Oꢀerating Tepꢀerature Range: -25 to +85ꢁ°

Construction

c

Center axis

Rotor spring terminal

Ceramic plate

Stator

(One molded injection

with stator terminal)

Stator terminal

13

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Characteristics

c

TZC3Z030

TZC3Z060

Z030 (NP0 300 ppmꢀ/C)

Z060 (NP0 300 ppmꢀ/C)

8

6

4

2

8

6

4

2

–25

20

85

Temp.(/C)

–25

20

85

Temp.(/C)

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

3

TZC3R100

TZC3P200

R100 (N750 300 ppmꢀ/C)

P200 (N1200 500 ppmꢀ/C)

8

6

4

8

6

4

2

20

85

Temp.(/C)

–25

20

85

Temp.(/C)

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

TZC3P300

P300 (N1200 500 ppmꢀ/C)

8

6

4

2

20

85

Temp.(/C)

–2

–4

–6

–8

–10

–12

14

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Frequency Characteristics

c

TZC3Z030

TZC3Z060

Z030

Z060

1000

100

Q

100

Q

10

3

1

100

500

1000

1500

2000

100

500

1000

1500

2000

Frequency (MHz)

TZC3R100

TZC3P200

R100

P200

1000

100

10

1000

Q

100

10

1

200

400

600

800

1000

200

400

600

800

1000

Frequency (MHz)

Land Pattern

c

+0

5.0

–0.5

3.3 0.1

Tolerance: 0.1

in mm

15

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Proﬁle

c

Reflow Soldering Profile

qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)

wSoldering profile for Eutectic solder (63Sn/37Pb)

(Limit profile: refer to q)

T5

T3

T4

T2

T3

T2

t2

T1

t2

t3

Limit Profile

T1

Standard Profile

t1

time (s)

Standard Profile

Heating

Standard Profile

Heating

Peak

temperature

(T3)

Peak

temperature

(T3)

Pre-heating

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

150 to 180°C 60 to 120sec. 220°C

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

30 to 60sec. 245 3°C

2 times

150°C 60 to 120sec. 183°C

30sec. 230 +5/-0°C 1 time

3

Limit Profile

Heating

Temp. (T4) Time (t3)

Peak

temperature

(T5)

Pre-heating

Temp. (T1) Time (t1)

Cycle

of reflow

150 to 180°C 60 to 120sec. 230°C

30 to 50sec. 260 +5/-0°C 2 times

Soldering Iron

Standard Profile

Temperature of soldering iron tip

Soldering time

Soldering iron power output

Cycle of soldering iron

350 10°C

3sec. max.

30W max.

1 time

Notice (Storage and Operating Conditions)

c

1. Do not use the trimmer capacitor under atmosphere

of RTV silicone rubber (Room Temperature

Vulcanizing Silicone Rubber) except Acetone

liberating silicone sealant.

6. Do not use the trimmer capacitor under the

conditions listed below.

(1) Corrosive gasses atmosphere

(ex. Chlorine gas, Hydrogen sulﬁde gas,

Ammonia gas, Sulfuric acid gas, Nitric oxide gas,

etc.)

2. Before using trimmer capacitors, please store under

the conditions of -10 to +40°C and 30 to

85%RH.

(2) In liquid (ex. water, oil, medical liquid,

organic solvent, etc.)

3. Do not store in or near corrosive gasses.

4. Use within 6 months of delivery.

(3) Dusty / dirty atmosphere

5. Do not store under direct sunlight.

(4) Direct sunlight

(5) Static voltage or electric/magnetic ﬁelds

(6) Direct sea breeze

(7) Other variations of the above

16

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Notice (Soldering and Mounting)

c

1. Soldering

(6) Our recommended chlorine content of solder is

as follows.

(1) TZC3 series can be soldered by reﬂow soldering

method and soldering iron. Do not use ﬂow

soldering method (dipping).

(a) Solder paste: 0.2wt% max.

(b) String solder: 0.5wt% max.

(2) Soldering conditions

(7) Do not use water-soluble ﬂux (for water

cleaning). To prevent the deterioration of

trimmer capacitor characteristics, apply ﬂux

only to terminals.

Refer to the temperature proﬁle.

If the soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer capacitor may deviate from the speciﬁed

characteristics.

(8) When soldering the TZC3 series, the solder

should not ﬂow into the staking part of the

substrate. If such ﬂow does occur, driver slot

rotation will be damaged.

(3) The amount of solder is critical.

(4) The thickness of solder paste should be printed

from 150 micro m to 200 micro m and the dimension

of land pattern should be Murata's standard land

pattern used at reﬂow soldering.

2. Mounting

3

(1) Do not apply excessive force (preferably 5.0 N

[Ref: 500gf] max.), when the trimmer capacitor

is mounted on the PCB.

Insufﬁcient amounts of solder can lead to

insufﬁcient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals or contact failure due to

ﬂux wicking up.

(2) Do not warp and/or bend PCB to protect trimmer

capacitor from breakage.

(3) Use a pick-up nozzle of a suitable dimension.

(2.5mm external diameter and 1.5mm bore

diameter.)

(5) When using soldering iron, the diameter of the

string solder shall be less than 0.5mm. The

string solder shall be applied to the lower

part of the terminal only. Do not apply ﬂux

except to the terminals. Excessive amounts of

solder and/or applying solder to the upper part

of the terminal may cause ﬁxed metal rotor or

contact failure due to ﬂux invasion into the

movable part and/or the contact point. The

soldering iron should not come in contact with

the stator of the trimmer capacitor. If such

contact does occur, the trimmer capacitor may

be damaged.

3. Cleaning

This product cannot be cleaned because of open

construction.

4. Other

Note the polarity of the trimmer capacitor to

minimize inﬂuence by stray capacitance.

(Refer to the dimensions concerning the polarity.)

Notice (Handling)

c

1. Use suitable screwdrivers that ﬁt comfortably in

3. Do not apply adhesive, lock paints, or any other

substances to the trimmer capacitor to secure the

rotor position. They may cause corrosion or

electrical contact problems.

driver slot.

(1) Recommended screwdriver for manual adjustment

Standard type --> MURATA: KMDR010

(2) Recommended screwdriver bit for automatic

adjustment

Standard type --> MURATA: KMBT010

2. When adjusting with a screwdriver, do not apply

excessive force (preferably 1.0 N [Ref: 100gf] max.)

to minimize capacitance drift. Excessive force applied

to the screwdriver slot may cause deformation of the

products.

Notice (Other)

c

Before using trimmer capacitors, please test after

assembly in your particular mass production system.

17

• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.

• This catalog has only tyꢀical sꢀeciﬁcations. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀeciﬁcations or transact the aꢀꢀroval sheet for ꢀroduct sꢀeciﬁcations before ordering.

!Note

T13E.ꢀdf

Mar.12,2015

Ceramic Trimmer Capacitors

TZW4 Series

5.2±±.2

ꢀ.6

±.4 Depth

Features

c

1. To peet high ꢀower aꢀꢀlication due to withstanding

voltage 550Vdc.

2. Extrepely high self-resonant frequency.

(More than 3GHz at rated ° pax.)

3. Tyꢀical aꢀꢀlication: Ipꢀedance patching for °ellular

Base Station.

3.±

2.2

4. High Q value in pore than VHF, UHF and Microwave

bands.

(More than 200 in 500MHz, ° pax.)

5. Available for ꢀick and ꢀlace pachine. Possible

thinner design due to 2.6pp low ꢀroﬁle.

6. Non-electrical contact construction

(rotor as piddle electrode) ꢀrovides high reliability.

7. °opꢀact size: 4.2(W)x5.2(L)x2.6pax.(H)pp.

+±.ꢀ

Tolerance: ±±.ꢀ

±.3

-±.2

(

)

in mm

4

Applications

c

1. Transpitting ꢀower apꢀliﬁer for °ellular base station

2. Transpitting apꢀliﬁer for PHS base station

3. High frequency electric circuit

4. High ꢀower radio transpission

5. Transꢀonder apꢀliﬁer for cable TV

C min. (max.)

(pF)

C max.

(pF)

Part Number

TC

Q

Rated Voltage

Withstanding Voltage

TZW4Z010A001

0.4

1.0 +50/-0%

NP0 150ꢀꢀp/ꢁ°

200pin. at 500MHz, °pax.

250Vdc

550Vdc

TZW4Z1R5A001

1.5 +100/-0%

Insulation Resistance: 10000M ohp

Torque: 1.5 to 10.0pNp

Oꢀerating Tepꢀerature Range: -55 to +125ꢁ°

Construction

c

Cover

Metal Rotor

Monolithic

Stator

18

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Characteristics

c

TZW4Z010

TZW4Z1R5

Z010 (NP0±150 ꢀꢀpm/Cꢁ

Z1R5 (NP0±±00 ꢀꢀpm/Cꢁ

8

6

4

2

8

6

4

2

–55

20

125

Tepꢀ.(/Cꢁ

–55

20

125

Tepꢀ.(/Cꢁ

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

Frequency Characteristics

Land Pattern

c

TZW4Z1R5

Z1R5

7.0

4.4

1000

4

1.5ꢀF set

100

Q

Tolerance: ±0.1

in pp

10

1

500

1000

1500

2000

2500

±000

Frequency (MHzꢁ

Temperature Proﬁle

c

Reflow Soldering Profile

qSoldering ꢀrofile for Lead-free solder (96.5Snm±Agm0.5Cuꢁ

wSoldering ꢀrofile for Eutectic solder (6±Snm±7Pbꢁ

(Lipit ꢀrofile: refer to qꢁ

T5

T±

T4

T2

T±

T2

t2

T1

t2

t±

Lipit Profile

T1

Standard Profile

t1

tipe (sꢁ

Standard Profile

Heating

Standard Profile

Heating

Peak

temperature

(T3)

Peak

temperature

(T3)

Pre-heating

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

150 to 180/C 60 to 120sec. 220/C

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

±0 to 60sec. 245±±/C

2 tipes

150/C 60 to 120sec. 18±/C

±0sec. 2±0 +5m-0/C 1 tipe

Limit Profile

Heating

Temp. (T4) Time (t3)

Peak

temperature

(T5)

Pre-heating

Temp. (T1) Time (t1)

Cycle

of reflow

150 to 180/C 60 to 120sec. 2±0/C

±0 to 50sec. 260 +5m-0/C 2 tipes

Soldering Iron

Standard Profile

Temperature of soldering iron tip

Soldering time

Soldering iron power output

Cycle of soldering iron

±50±10/C

±sec. pax.

±0W pax.

1 tipe

19

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Notice (Storage and Operating Conditions)

c

1. Do not use the trimmer capacitor under atmosphere

of RTV silicone rubber (Room Temperature

Vulcanizing Silicone Rubber) except Acetone

liberating silicone sealant.

6. Do not use the trimmer capacitor under the

conditions listed below.

(1) Corrosive gasses atmosphere

(Ex. Chlorine gas, Hydrogen sulﬁde gas,

Ammonia gas, Sulfuric acid gas, Nitric oxide gas,

etc.)

2. Before using trimmer capacitors, please store under

the conditions of -10 to +40°C and 30

to 85%RH.

(2) In liquid (Ex. water, oil, medical liquid,

organic solvent, etc.)

3. Do not store in or near corrosive gasses.

4. Use within 6 months of delivery.

(3) Dusty/dirty atmosphere

5. Do not store under direct sunlight.

(4) Direct sunlight

(5) Static voltage or electric/magnetic ﬁelds

(6) Direct sea breeze

(7) Other variations of the above

Notice (Soldering and Mounting)

c

1. Soldering

the contact failure due to ﬂux invasion into

the movable part and/or the contact point. The

soldering iron should not come in contact with

the monolithic stator of the trimmer capacitor.

If such contact does occur, the trimmer

capacitor may be damaged.

(1) TZW4 series can be soldered by reﬂow soldering

method and soldering iron. Do not use ﬂow

soldering method (dipping).

4

(2) Soldering conditions

Refer to the temperature proﬁle.

If the soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer capacitor may deviate from the speciﬁed

characteristics.

(6) Our recommended chlorine content of solder is

as follows.

(a) Solder paste: 0.2wt% max.

(b) String solder: 0.5wt% max.

(3) The amount of solder is critical.

(7) Do not use water-soluble ﬂux (for water

cleaning). To prevent the deterioration of

trimmer capacitor characteristics, apply ﬂux

only to terminals.

(4) The thickness of solder paste should be printed

from 150 micro m to 200 micro m and the dimension

of land pattern should be Murata's standard land

pattern used at reﬂow soldering.

2. Mounting

Insufﬁcient amounts of solder can lead to

insufﬁcient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals or contact failure due to

ﬂux wicking up.

(1) Do not apply excessive force (preferably 5.0 N

[Ref: 500gf] max.), when the trimmer capacitor

is mounted on the PCB.

(2) Do not warp and/or bend PCB to protect trimmer

capacitor from breaking.

(5) When using soldering iron, the diameter of the

string solder shall be less than 0.5mm. The

string solder shall be applied to the lower

part of the terminal only. Do not apply ﬂux

except to the terminals. Excessive amounts of

solder and/or applying solder to the upper part

of the terminal may cause ﬁxed metal rotor or

(3) Use a pick-up nozzle of a suitable dimension.

(4.0mm external diameter and 1.2mm bore

diameter.)

3. Cleaning

This product cannot be cleaned because of open

construction.

Notice (Handling)

c

1. Use suitable screwdrivers that ﬁt comfortably in

3. Do not apply adhesive, lock paints, or any other

substances to the trimmer capacitor to secure the

rotor position. They may cause corrosion or

electrical contact problems.

driver slot.

-Recommended screwdriver for manual adjustment

VESSEL : No.9000 -1.3x30

(Murata P/N is KMDR130)

2. When adjusting with a screwdriver, do not apply

excessive force (preferably 1.0 N [Ref: 100gf] max.)

to minimize capacitance drift. Excessive force applied

to the screwdriver slot may cause deformation of the

products.

Notice (Other)

c

Before using trimmer capacitors, please test after

assembly in your particular mass production system.

20

• Please read rating and !°AUTION (for storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.

• This catalog has only tyꢀical sꢀeciﬁcations. Therefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀeciﬁcations or transact the aꢀꢀroval sheet for ꢀroduct sꢀeciﬁcations before ordering.

!Note

T13E.ꢀdf

Mar.1±,±015

Ceramic Trimmer Capacitors

TZB4 Series

0.6 0.ꢀ1 Dept10.ꢁ

ꢀ.4 0.ꢀ1ꢂdi.

Features

c

1. Miniature rectangular shaꢀe:

4.0(W)x4.5(L)x3.0(H)pp.

4.ꢁ 0.2

±. °olor coded case facilitates identiﬁcation of

caꢀacitance range.

3. Designed for autopatic ꢀlacepent in surface pount

aꢀꢀlications.

2.7 0.ꢃ

ꢀ.2 0.ꢀ

4. Designed to withstand ﬂux baths and solder baths

(with cover ﬁlp tyꢀe).

A Type

TolDrincD:1 0.ꢁ

dn1mm

5. °an be tepꢀorarily attached to P°B with adhesives

(Terpinal style A and B).

ꢁ.0

6. °an be reﬂow and ﬂow (with cover ﬁlp tyꢀe)

soldering pethod.

0.6 0.ꢀ1 Dept10.ꢁ

ꢀ.4 0.ꢀ1ꢂdi.

7. Stable characteristics over a wide frequency range.

(Resonant frequency: 1000MHz pin. / 6ꢀF)

4.ꢁ 0.2

Applications

c

1. °ar audio systeps

±. °ordless teleꢀhones

3. Hybrid I°s

5

ꢀ.2 0.ꢀ

4. Repote keyless entry systeps

5. Tuner ꢀacks

B Type

TolDrincD:1 0.ꢁ

dn1mm

6. Surveillance caperas

7. DVD

7.0

8. Burglarꢀroof devices

9. Entry ꢀhone

C min. (max.)

(pF)

C max.

(pF)

Part Number

TC

Q

Rated Voltage Withstanding Voltage Stator/Case Color

TZB4Z030

TZB4Z060

TZB4Z100

10

1.4

±.0

3.0

4.5

6.5

8.5

4.0

7.0

3.0 +50/-0%

6.0 +50/-0%

10.0 +50/-0%

±0.0 +50/-0%

NP0±±00ꢀꢀp/ꢁ°

300pin. at 1MHz, °pax

100Vdc

50Vdc

±±0Vdc

110Vdc

Brown

Blue

pp

NP0±±00ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.

NP0±300ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax.

N750±400ꢀꢀp/ꢁ° 500pin. at 1MHz, °pax

White

TZB4R200

TZB4P300

TZB4P400

10

Red

pp

30.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax

40.0 +50/-0% N1±00±500ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax

Green

Yellow

TZB4Z250

10

pp

±5.0 +100/-0%

50.0 +100/-0% N750±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax

Torque: 1.5 to 9.8pNp Oꢀerating Tepꢀerature Range: -±5 to +85ꢁ°

Second blank: °over ﬁlp codes (A: not ꢀrovided, B: ꢀrovided)

rex. TZB4Z100AB10: Terpinal Tyꢀe is A, and °over ﬁlp is ꢀrovided.

NP0±300ꢀꢀp/ꢁ° 300pin. at 1MHz, °pax.

Black+Marking

TZB4R500

10

pp

50Vdc

Insulation Resistance: 10000M ohp

First blank: Terpinal Tyꢀe

Construction

c

Cover Film (Cover film type)

Rotor Spring

Plastic Case

–

Metal Rotor

Ceramic Plate

Stator Terminal

+

Rotor Terminal

±1

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Land Pattern/Mounting Holes

c

A Type

B Type

+±

8.±

- ±.5

7.±

- ±.5

4.±±±.2

2.4±±.2

(in mm)

Temperature Characteristics

c

TZB4Z030

TZB4Z060

Z±3± (NP±±2±± ppmꢀ/C)

Z±6± (NP±±2±± ppmꢀ/C)

8

6

4

2

8

6

4

2

–25

2±

85

Temp.(/C)

–25

2±

85

Temp.(/C)

–2

–4

–2

–4

–6

–8

5

–1±

–12

–1±

–12

TZB4Z100

TZB4R200

Z1±± (NP±±3±± ppmꢀ/C)

R2±± (N75±±4±± ppmꢀ/C)

8

6

4

8

6

4

2

–25

2±

85

Temp.(/C)

–25

2±

85

Temp.(/C)

–2

–4

–2

–4

–6

–8

–1±

–12

–1±

–12

TZB4P300

TZB4P400

P300 (N1200 500 ꢀꢀpm/°C

P400 (N1200 500 ꢀꢀpm/°C

8

6

4

8

6

4

2

–25

20

85

Tepꢀ.(/°C

–25

20

85

Tepꢀ.(/°C

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

Continued on the following page.

22

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

°ontinued frop the ꢀreceding ꢀage.

Temperature Characteristics

c

TZB4Z250

TZB4R500

Z250 (NP0 300 ꢀꢀpm/°C

R500 (N750 300 ꢀꢀpm/°C

8

6

4

2

8

6

4

2

–25

20

85

Tepꢀ.(/°C

–25

20

85

Tepꢀ.(/°C

–2

–4

–2

–4

–6

–8

–10

–12

–10

–12

Frequency Characteristics

c

TZB4Z060

TZB4Z100

Z060

Z100

1000

100

Q

100

Q

5

10

1

100 200 300 400 500 600 700 800 900 1000

Frequency (MHzC

TZB4R200

TZB4R500

R500

R200

1000

100

10

1000

100

Q

10

1

100

200

300

400

500

600

100

200

300

400

500

Frequency (MHz)

23

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Temperature Proﬁle

c

Flow Soldering Profile

Soldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu), Eutectic solder (63Sn/37Pb)

T3

T2

Standard Profile

Heating

t2

Limit Profile

Pre-heating

Cycle

T1

of reflow

Standard Profile

Temp. (T1)

Time (t1)

Temp. (T2)

Time (t2)

150°C

60 to 120sec.

250°C

5sec. max.

1 time

t1

time (s)

Limit Profile

Pre-heating

Heating

s )MMERSE THE BODY IN SOLDER BATHꢀ AVAILABLE FOR COVER FILM TYPEꢁ

Cycle

of reflow

Temp. (T1)

Time (t1)

Temp. (T3)

Time (t2)

150°C

60 to 120sec.

265 3°C

5sec. max.

2 times

Reflow Soldering Profile

qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)

wSoldering profile for Eutectic solder (63Sn/37Pb)

(Limit profile: refer to q)

T5

T3

T4

T2

T3

T2

T1

t2

t3

Limit Profile

T1

Standard Profile

t1

time (s)

t1

time (s)

Standard Profile

Heating

Standard Profile

Heating

Peak

temperature

(T3)

Peak

temperature

(T3)

Pre-heating

5

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

150 to 180°C 60 to 120sec. 220°C

Temp. (T1) Time (t1) Temp. (T2) Time (t2)

30 to 60sec. 245 3°C

2 times

150°C 60 to 120sec. 183°C

30sec. 230 +5/-0°C 1 time

Limit Profile

Heating

Peak

temperature

(T5)

Pre-heating

Cycle

of reflow

Temp. (T1) Time (t1) Temp. (T4) Time (t3)

150 to 180°C 60 to 120sec. 230°C

30 to 50sec. 260 +5/-0°C 2 times

s !VAILABLE FOR TERMINAL SHAPE !ꢀ "ꢀ AND %ꢁ

Soldering Iron

Standard Profile

Temperature of soldering iron tip

Soldering time

Soldering iron power output

Cycle of soldering iron

350 10°C

3sec. max.

30W max.

1 time

Notice (Storage and Operating Conditions)

c

1. Do not use the trimmer capacitor under atmosphere

of RTV silicone rubber (Room Temperature

Vulcanizing Silicone Rubber) except Acetone

liberating silicone sealant.

6. Do not use the trimmer capacitor under the

conditions listed below.

(1) Corrosive gasses atmosphere

(ex. Chlorine gas, Hydrogen sulﬁde gas,

Ammonia gas, Sulfuric acid gas, Nitric oxide gas,

etc.)

2. Before using trimmer capacitors, please store under

the conditions of -10 to +40°C and 30 to

85%RH.

(2) In liquid (ex. water, oil, medical liquid,

organic solvent, etc.)

3. Do not store in or near corrosive gasses.

4. Use within 6 months of delivery.

(3) Dusty / dirty atmosphere

5. Do not store under direct sunlight.

(4) Direct sunlight

(5) Static voltage or electric/magnetic ﬁelds

(6) Direct sea breeze

(7) Other variations of the above

24

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Notice (Soldering and Mounting)

c

1. Soldering

2. Mounting

(1) Can be soldered by reﬂow soldering method, ﬂow

soldering method, and soldering iron.

(2) Soldering conditions

(1) Do not apply excessive force (preferably 5.0N

[Ref: 500gf] max.), when the trimmer capacitor

is mounted on the PCB.

Refer to the temperature proﬁle.

(2) Do not warp and/or bend PCB to protect trimmer

capacitor from breakage.

If the soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer capacitor may deviate from the speciﬁed

characteristics.

(3) When bending the terminals, do not apply

excessive force to the body of the product to

protect the terminal ﬁxing part from damage.

(4) Use a pick-up nozzle of a suitable dimension.

> Without cover ﬁlm type

(3) The amount of solder is critical.

(4) The thickness of solder paste should be printed

from 150 micro m to 200 micro m and the dimension

of land pattern should be Murata's standard land

pattern used at reﬂow soldering. Insufﬁcient

amounts of solder can lead to insufﬁcient

soldering strength on PCB. Excessive amounts of

solder may cause bridging between the terminals

or contact failure due to ﬂux wicking up.

(5) When using soldering iron, the string solder

shall be applied to the lower part of the

terminal only. Do not apply ﬂux except to the

terminals. Excessive amounts of solder and/or

applying solder to the upper part of the

terminal may cause ﬁxed rotor or contact failure

due to ﬂux invasion into the movable part and/or

the contact point. The soldering iron should not

come in contact with the plastic case of the

trimmer capacitor. If such contact does occur,

the trimmer capacitor may be damaged.

(6) Our recommended chlorine content of solder is

as follows.

- External dimensions of 4.5x4.0mm and

2.5mm bore diameter.

> With cover ﬁlm type

- 4.0mm external diameter and 2.0mm bore

diameter.

3. Cleaning [with cover ﬁlm type]

Isopropyl alcohol and ethyl alcohol are available

material for cleaning. If you use any other type of

solvent, please evaluate performance in your

application. Moreover, please conﬁrm that no

damage has occurred to the trimmer capacitor

after cleaning in your conditions.

4. Other

Note the polarity of the trimmer capacitor to

minimize inﬂuence by stray capacitance.

(Refer to the dimensions concerning the polarity.)

5

(a) Solder paste: 0.2wt% max.

(b) String solder: 0.5wt% max.

(7) Do not use water-soluble ﬂux (for water

cleaning). To prevent the deterioration of

trimmer capacitor characteristics, apply ﬂux

only to terminals.

Notice (Handling)

c

1. Use suitable screwdrivers that ﬁt comfortably in

3. Do not apply adhesive, lock paints, or any other

substances to the trimmer capacitor to secure the

rotor position. They may cause corrosion or

electrical contact problems.

driver slot.

(1) Recommended screwdriver for manual adjustment

MURATA: KMDR010

(2) Recommended screwdriver bit for automatic

adjustment

4. Do not break the cover ﬁlm before the completion

of PCB mounting, soldering, and cleaning.

5. Do not clean the trimmer capacitor after the cover

ﬁlm has been broken.

MURATA: KMBT010

2. When adjusting with a screwdriver, do not apply

excessive force (preferably 1.0 N [Ref: 100gf] max.)

to minimize capacitance drift. Excessive force applied

to the screwdriver slot may cause deformation of the

products.

6. To break the cover ﬁlm, ﬁrst turn the screwdriver

more than 360°, and set the capacitance value.

(Inserting the screwdriver only will not break the

cover ﬁlm.)

Notice (Other)

c

Before using trimmer capacitors, please test after

assembly in your particular mass production system.

25

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Packaging

Minimum Quantity

c

Minimum Quantity (pcs.)

Part Number

ø180mm Reel

3000

ø330mm Reel

Bulk

500

100

500

-

TZR1

TZY2

TZC3

TZW4

TZB4

2000

-

1000

-

500

2500

Tape Dimensions

c

TZR1 Series

TZY2 Series

+0.1

1.5

A

dia.

– 0

2.0

4.0

t

2.0 0.1

4.0 0.1

0.25

1.05 0.2

0.25 0.1

4.0 0.1

+0.1

-0

1.5

dia.

A-Across

section

A

2.7 0.2

1.8 0.2

4.0

t=TZY2 (TZVY2) : 1.6 0.2

(in mm)

Tolerance: 0.1

in mm

TZC3 Series

TZW4 Series

+0.1

dia.

– 0

1.5

dia.

1.5

2.0 0.2

0.3

2.6

– 0

2

4

2

4

0.3

A

A-Across

section

A

A-Across

section

3.6 0.2

4.6

8

Tolerance : 0.1

in mm

Tolerance: 0.1

in mm

TZB4 Series

+0.1

1.5

dia.

– 0

3.55 0.2

2.0

8.0

4 .0

0.3 0.1

A

1.8

4.3

A-Across

section

A

Direction of feed

Tolerance: 0.1

in mm

Continued on the following page.

26

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Packaging

Continued from the preceding page.

Reel Dimensions (180mm diameter)

c

TZR1/TZY2 Series

TZC3/TZW4/TZB4 Series

13.0 0.ꢀ dia.

21.0 0.ꢁ dia.

2.0 0.ꢀ

21.0 0.ꢁ dia.

9.0 1.0

13.0 1.0

17.0 1.0

13.0 1.0

17ꢁ 2 dia.

(in mm)

Reel Dimensions (330mm diameter)

c

TZB4 Series

13.0 0.ꢀ dia.

2.0 0.ꢀ

21.0 0.ꢁ dia.

13.ꢀ 1.0

17.ꢀ 1.0

32ꢁ 2 dia.

(in mm)

27

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Recommended Adjustment Tools

Please use the following recommended screwdrivers.

You can order these drivers using the part numbers below.

Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the

driver listed below.

c For Manual Adjustment

MURATA

Model Number

Manufacturer’s

Model Number

Series

Shape

80

1.5

MURATA MFG.

TZR1

TZY2

KMDR160

KMDR060

KMDR010

KMDR130

KMDR160

Bit shape:

Minus (0.3x0.13)

108

(in mm)

18

ENGINEER INC.

DA-89

Bit shape: Minus (0.8x0.35)

122

50

20

TZC3

TZB4

MURATA MFG.

KMDR010

Bit shape: Minus (2.2x0.4)

125

15

VESSEL MFG.

CERAMIC BLADE

ELECTRONICS

9000

1.3-30

TZW4

NO.9000 -1.3g30

Bit shape: Minus (1.3x30)

(in mm)

c For Automatic Adjustment

MURATA

Model Number

Manufacturer’s

Model Number

Series

Shape

25

0.6

MURATA MFG.

TZY2

KMBT060

KMBT010

KMBT060

Bit shape: Minus (0.56x0.25)

(in mm)

30

TZC3

TZB4

MURATA MFG.

KMBT010

Bit shape: Minus (2.2x0.4)

(in mm)

28

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

!Note

T13E.pdf

Mar.12,2015

Qualified Standards

The products listed herein have been produced

by a ISO9001 certified factory.

MURATA FACTORY

Sabae Murata Mfg. Co., Ltd.

∗ No ODCs (Ozone Depleting Chemicals) are used on

any Murata trimmer capacitors.

29

Cat. No. T13E-16

Global Locations

For details please visit www.murata.com

Note

1 Export Control

2 Please contact our sales representatives or

product engineers before using the products in

this catalog for the applications listed below,

which require especially high reliability for the

prevention of defects which might directly

damage a third party’s life, body or property, or

when one of our products is intended for use

in applications other than those specified in

this catalog.

3 Product speciﬁcations in this catalog are as of May

2014. They are subject to change or our products

in it may be discontinued without advance notice.

Please check with our sales representatives

or product engineers before ordering. If there

are any questions, please contact our sales

representatives or product engineers.

For customers outside Japan:

No Murata products should be used or

sold, through any channels, for use in the

design, development, production, utilization,

maintenance or operation of, or otherwise

contribution to (1) any weapons (Weapons of

Mass Destruction [nuclear, chemical or biological

weapons or missiles] or conventional weapons)

or (2) goods or systems specially designed or

intended for military end-use or utilization by

military end-users.

4 Please read rating and CAUTION (for storage,

operating, rating, soldering, mounting and

handling) in this catalog to prevent smoking

and/or burning, etc.

1

2

3

4

5

6

Aircraf equipment

Aerospace equipment

Undersea equipment

Power plant equipment

Medical equipment

5 This catalog has only typical speciﬁcations.

Therefore, please approve our product

speciﬁcations or transact the approval sheet

for product speciﬁcations before ordering.

For customers in Japan:

For products which are controlled items subject

to the “Foreign Exchange and Foreign Trade Law”

of Japan, the export license speciﬁed by the law

is required for export.

6 Please note that unless otherwise speciﬁed, we

shall assume no responsibility whatsoever for any

conﬂict or dispute that may occur in connection

with the eﬀect of our and/or a third party’s

intellectual property rights and other related

rights in consideration of your use of our products

and/or information described or contained in our

catalogs. In this connection, no representation

shall be made to the eﬀect that any third parties

are authorized to use the rights mentioned above

under licenses without our consent.

Transportation equipment (vehicles, trains,

ships, etc.)

7

8

Traﬃc signal equipment

Disaster prevention / crime prevention

equipment

9

Data-processing equipment

10 Application oꢀ similar complexity and/or

reliability requirements to the applications

listed above

7 No ozone depleting substances (ODS) under the

Montreal Protocol are used in our manufacturing

process.

Murata Manufacturing Co., Ltd.

www.murata.com

厂商	型号	描述	页数
MURATA	TZY2K200A001A00	[ Ceramic Trimmer Capacitors ]	46 页
MURATA	TZY2K200B001A00	[ Ceramic Trimmer Capacitors ]	46 页
MURATA	TZY2K200C001A00	[ Ceramic Trimmer Capacitors ]	46 页
MURATA	TZY2K450A001	陶瓷微调电容器[ Ceramic Trimmer Capacitors ]	44 页
MURATA	TZY2K450A001B00	[ New shape of cover can improve the flux invasion compared with current products ]	3 页
MURATA	TZY2K450A001R00	[ New shape of cover can improve the flux invasion compared with current products ]	3 页
MURATA	TZY2K450AC01B00	[ New shape of cover can improve the flux invasion compared with current products ]	3 页
MURATA	TZY2K450AC01R00	[ New shape of cover can improve the flux invasion compared with current products ]	3 页
MURATA	TZY2KA001B00	[ Ceramic Trimmer Capacitors ]	1 页
MURATA	TZY2KB001B00	[ Ceramic Trimmer Capacitors ]	1 页