AZ9405
10 AMP MINIATURE
POWER RELAY
FEATURES
• 4 kV dielectric strength
• Epoxy sealed version available
• 4 mm clearance & 6 mm creepage (1 Form A)
• 3 mm clearance & 5 mm creepage (1 Form C)
• UL, CUR file E44211
• TÜV R50304647
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
GENERAL DATA
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
7
1 x 10
5
Max. switched power: 150 W or 1400 VA (N.O.)
90 W or 850 VA (N.C.)
1 x 10 at rated load
Operate Time (max.)
Release Time (max.)
Dielectric Strength
10 ms at nominal cail voltage (standard)
15 ms at nominal coil voltage (sensitive)
Max. switched current: 10 A
Max. switched voltage: 30 VDC* or 277 VAC
5 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Rated Load
UL
1 Form A
Insulation
1000 megohms min. at 20°C, 500 VDC,
50% RH
10 A at 125 VAC, resistive, 85°C, 100k cycles
5 A at 277 VAC, resistive, 85°C, 100k cycles
1/10 HP at 125/250 VAC, 85°C, 100k cycles
Resistance
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
1 Form C - normally open contacts
-40°C (-40°F) to 85°C (185°F)
5 A at 277 VAC, resistive, 85°C, 100k cycles
5 A at 30 VDC, resistive, 85°C, 100k cycles
1/10 HP at 125/250 VAC, 85°C, 100k cycles
Vibration
1.5 mm DA at 10–55 Hz
10 g operating, 100 g damage
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Shock
Enclosure
1 Form C - normally closed contacts
3 A at 277 VAC, resistive, 85°C, 100k cycles
3 A at 30 VDC, resistive, 85°C, 100k cycles
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
TÜV
1 Form A
5 seconds
10 A at 125 VAC, resistive, 85°C, 100k cycles
5 A at 277 VAC, resistive, 85°C, 100k cycles
80°C (176°F)
30 seconds
1 Form C - normally open contacts
5 A at 277 VAC, resistive, 85°C, 100k cycles
5 A at 30 VDC, resistive, 85°C, 100k cycles
7 grams
COIL
1 Form C - normally closed contacts
3 A at 277 VAC, resistive, 85°C, 100k cycles
3 A at 30 VDC, resistive, 85°C, 100k cycles
Power
At Pickup Voltage
(typical)
196 mW (standard coil)
113 mW (sensitive coil)
Material
Silver tin oxide
Resistance
< 100 milliohms initially
(6 V, 1 A voltage drop method)
Max. Continuous
Dissipation
676 mW at 20°C (68°F) ambient
NOTES
Temperature Rise
42°C (76°F) standard coil
24°C (44°F) sensitive coil
1. All values at 20°C (68°F)
(at nominal voltage)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 130°C (266°F)
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2015-01-16
