Accessories
Electrical
ELECTRICAL
ELECTRICAL ACCESSORIES
Features
Product
Accessory For
Used in installations with more than one breaker
and more than one Littelfuse Arc-Flash Relay. It
separates the trip paths, so the breakers can be
tripped independently from each other.
PGA-1100.0010
Diode Logic Unit
PGR-8800
D0920
AF0500
D1000
AF0100
Full datasheet and ordering information available at
www.littelfuse.com/pga1100
P1004-XX-(X)
P1004-95 & P1004-95-X:
Consult individual datasheet for
compatibility
Versa-Pot
Panel mountable, industrial potentiometer
recommended for remote time delay adjustment.
The shaft is slotted for screwdriver adjustment and
serrated for slip-proof finger adjustment. Accepts
Versa-Knob or Lock Shaft. May be ordered with
two 8 in (20.3 cm) wires soldered to pot
(clockwise increase) and female quick connect
terminals on other ends by adding suffix -X to end of
part number.
PART NUMBER WITH WIRE LEADS
P±004-±99
VALUE
50 kΩ
±00 kΩ
200 kΩ
±00 kΩ
500 kΩ
±M Ω
P1004-174 & P1004-175:
PHS Series
P±004-±74
P±004-±75
P1004-16 & P1004-16-X:
Series: ERDM ERDI ERD3 TRB TRM
TRS TS1 TS6
P±004-95
P±004-±7
P±004-±6
P±004-±5
P±004-±4
P±004-±2
P±004-±3
P±004-95-X
P±004-±6-X
Specifications
Rating
Taper
0.25 W at 55 °C
Linear
P1004-15, P1004-14, P1004-13, P1004-12,
& P1004-12-X:
Series: ORB ORM ORS TAC1 THD7
TRB TRM TRS TS1 TS2
TS4 TS6 TSD7 TSU2000
±.5M Ω
2M Ω
Shaft Rotation
Tolerance
Shaft Diameter
300° ±5°
±±0 %
0.25 in
P±004-±2-X
3M Ω
5M Ω
P0700-7
Versa-Knob is designed for 0.25 in (6.35 mm) shaft
of Versa-Pot. Semi-gloss industrial black finish.
P1004-XX-(X)
P1004-XX-(X)
Versa-Knob
Fits 0.25 in (6.35 mm) potentiometer shafts. Locks
by tightening nut onto four tapered/slotted fingers.
Pressure on the shaft locks control against
mis-adjustment. Nickel plated brass finish.
P0700-8
Lock Shaft
A high quality, industrial potentiometer for remote
time delay adjustment. The shaft extends through
the timer’s center hole for easy panel mounting. Use
mini-mount bracket for standup mounting of timer.
Adjustment by screwdriver or mini-knob. May be
ordered with two 3 in (7.6 cm) wires soldered to
pot (clockwise increase) and female quick connect
terminals on other ends by adding suffix -X to end of
part number.
P1004-9
P1004-10
P1004-31
Mini-Pot
Series: TAC1
TS4
TS1
TS6
TS2
TSD7
PART NUMBER
P±004-9
VALUE
500kΩ
±MΩ
TSU2000
Specifications
P±004-±0
P±004-3±
Rating
Taper
0.25 W at 55 °C
Linear
3MΩ
Shaft Rotation
Tolerance
Shaft Diameter
300° ±5°
±±0 %
0.±25 in (3.2 mm)
P0700-21
Mini-Knob
Mini-Knob is designed for 0.±25 in (3.2 mm) shaft of
Mini-Pot. Semi-gloss industrial black finish.
P1004-9
P1004-10
P1004-31
© 2019 Littelfuse, Inc.
www.littelfuse.com/relayaccessories
469
