AZ9371
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint
• Thin vertical profile only 0.275" (7 mm) wide
• High sensitivity, 113 mW pickup
• Dielectric strength 4000 Vrms
• 5 Amp switching capability (version “T” 10 Amp)
• Two different footprints available
• UL, CUR file E44211
• VDE 40030746
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Minimum operations
5 million operations
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 150 W or 1385 VA
(Version “T”: 300 W or 2770 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 277 VAC
Standard version
Electrical
1 X 105 at 5 A, 250 VAC res. [1]
5 X 104 at 5 A, 250 VAC res. [2]
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
High capacity version “T”
Electrical
1 X 105 at 7 A, 250 VAC res. [1]
1 X 104 at 10 A, 250 VAC res. [1][2]
3 X 104 at 7 A, 250 VAC res. [2]
Rated Load
UL/CSA
5 A at 277/250/125 VAC General Use [1][2]
5 A at 30 VDC General Use [1][2]
B300 Pilot Duty 120/240 VAC, 125/250VAC [2]
"T" Version
10 A at 277/250/125 VAC General Use [1][2]
10 A at 30 VDC General Use [1][2]
Operate Time (typical)
Release Time (typical)
10 ms at nominal coil voltage
5 A at 250 VAC / 30 VDC [1][2]
10 A at 250VAC / 30 VDC (T version)
VDE
10 ms at nominal coil voltage
(with no coil suppression)
Material
Silver nickel [1], silver tin oxide [2],
gold plating available
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Resistance
< 100 milliohms initially
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
(at 6 V, 1 A, voltage drop method)
COIL
Dropout
Greater than 5% of nominal coil voltage
Power
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
At Pickup Voltage
(typical)
113 mW
Storage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
10 g
Max. Continuous
Dissipation
750 mW at 20°C (68°F) ambient
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Temperature Rise
Temperature
26°C (47°F) at nominal coil voltage
Max. 105°C (221°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
NOTES
80°C (176°F)
1. All values at 20°C (68°F).
30 seconds
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
3 grams
9/10/10
