KOA SPEER ELECTRONICS, INC.
SS-219 R16
5. Characteristics (continued)
Item
Requirement
Conditions
Bending Strength
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value before test
±10%
Board: 90x40x1.6mm
Bend: 1mm
Time: 5 sec
Mechanical Shock
Vibration
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value before test
±10%
Force: 50G
Time: 11 msec
There shall be 3 shocks in each of 6 directions
(18 shocks total).
Impedance: Relative to initial value ±10%
Only endurance conditioning by sweeping shall
be made. The entire frequency range from
10-2,000Hz and return to 10Hz in 20
minutes (this shall constitute one cycle).
Amplitude: 1.5mm
The test shall have a 15G peak and shall be
applied for a period of 4 hours (12 cycles)
in each of 3 mutually perpendicular directions
(a total of 36 cycles within a total of 12 hours).
Thermal Shock
Appearance: There shall be no physical or
mechanical damage.
Impedance: Relative to initial value ±20%.
DCR: The DCR shall not exceed initial specified
value.
Step
1-start
Temperature
Time
-40°C ±2°C
2-hold
-40°C ±2°C 30 min ±5 min
0.5 min max.
+105°C ±2°C 30 min ±5 min
0.5 min max.
3-transfer
4-hold
5-transfer
Testing of the parts will be made at 0 hours, 250
hours and 500 hours. Before testing the parts
shall be allowed to cool to room temperature for
24 hours.
Steps 1 thru 5 constitute one complete cycle
and the test shall consist of a total of 500
cycles.
Load Humidity
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Temperature: 85°C ±2°C
Relative Humidity: 85%
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
Life Test
Appearance: There shall be no physical or
mechanical damage
Impedance: Relative to initial value ±15%
Temperature: 85°C ±2°C
Time: 1,000 hours total
Apply: 100% rated current
Measurements shall be taken at 0 hours, 250
hours, 500 hours and 1,000 hours and shall meet
the conditions stated above.
PAGE 13 OF 15
■
■
■
■
■
■
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.