SMCGLCE6.5 thru SMCGLCE170A, e3  
					SMCJLCE6.5 thru SMCJLCE170A, e3  
					1500 WATT LOW CAPACITANCE  
					SURFACE MOUNT TRANSIENT  
					VOLTAGE SUPPRESSOR  
					S C O T T S D A L E D I V I S I O N  
					DESCRIPTION  
					APPEARANCE  
					This surface mount Transient Voltage Suppressor (TVS) product family includes a  
					rectifier diode element in series and opposite direction to achieve low capacitance  
					below 100 pF. They are also available as RoHS Compliant with an e3 suffix. The low  
					TVS capacitance may be used for protecting higher frequency applications in inductive  
					switching environments or electrical systems involving secondary lightning effects per  
					IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. They  
					also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar  
					transient capability is required, two of these low capacitance TVS devices may be used  
					in parallel and opposite directions (anti-parallel) for complete ac protection (Figure 6).  
					IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
					FEATURES  
					APPLICATIONS / BENEFITS  
					•
					•
					•
					•
					Available in standoff voltage range of 6.5 to 200 V  
					Low capacitance of 100 pF or less  
					•
					•
					•
					1500 Watts of Peak Pulse Power at 10/1000 μs  
					Low capacitance for data line protection to 1 MHz  
					Molding compound flammability rating: UL94V-O  
					Protection for aircraft fast data rate lines up to  
					Level 5 Waveform 4 and Level 2 Waveform 5A in  
					RTCA/DO-160D (also see MicroNote 130) &  
					ARINC 429 with bit rates of 100 kb/s (per ARINC  
					429, Part 1, par 2.4.1.1)  
					Two different terminations available in C-bend (modified J-  
					Bend with DO-214AB) or Gull-wing (DO-215AB)  
					•
					Options for screening in accordance with MIL-PRF-19500  
					for JAN, JANTX, and JANTXV are available by adding MQ,  
					MX, or MV prefixes respectively to part numbers  
					•
					IEC61000-4-2 ESD 15 kV (air), 8 kV (contact)  
					•
					IEC61000-4-5 (Lightning) as further detailed in  
					LCE6.5 thru LCE170A data sheet  
					•
					•
					Optional 100% screening for avionics grade is available by  
					adding MA prefix to part number for 100% temperature  
					cycle –55ºC to 125ºC (10X) as well as surge (3X) and 24  
					hours HTRB with post test VBR & IR  
					•
					•
					•
					T1/E1 Line Cards  
					Base Stations, WAN & XDSL Interfaces  
					CSU/DSU Equipment  
					RoHS Compliant devices available by adding an “e3” suffix  
					MAXIMUM RATINGS  
					MECHANICAL AND PACKAGING  
					CASE: Molded, surface mountable  
					•
					1500 Watts of Peak Pulse Power dissipation at 25oC with  
					repetition rate of 0.01% or less*  
					•
					•
					TERMINALS: Gull-wing or C-bend (modified J-  
					bend) tin-lead or RoHS compliant annealed  
					matte-tin plating solderable per MIL-STD-750,  
					method 2026  
					•
					Clamping Factor: 1.4 @ Full Rated power  
					1.30 @ 50% Rated power  
					•
					•
					•
					•
					tclamping (0 volts to V(BR) min): Less than 5x10-9 seconds  
					Operating and Storage temperatures: -65 to +150oC  
					Steady State power dissipation: 5.0W @ TL = 50oC  
					•
					•
					POLARITY: Cathode indicated by band  
					MARKING: Part number with abbreviated prefix  
					(CLC6.5A, CLC6.5Ae3, CLC33, CLC33e3, etc.)  
					THERMAL RESISTANCE: 20oC/W (typical junction to  
					lead (tab) at mounting plane  
					•
					TAPE & REEL option: Standard per EIA-481-B  
					with 16 mm tape, 750 per 7 inch reel or 2500 per  
					13 inch reel (add “TR” suffix to part number)  
					* When pulse testing, do not pulse in opposite direction  
					(see “Schematic Applications” section herein and  
					Figures 5 & 6 for further protection in both directions)  
					ELECTRICAL CHARACTERISTICS @ 25oC  
					Maximum Maximum  
					Reverse  
					IIB  
					VWIB  
					VPIB  
					Peak  
					Inverse  
					Blocking  
					Voltage  
					Volts  
					MICROSEMI  
					Part Number  
					MICROSEMI  
					Part Number  
					Maximum  
					Capacitance Working  
					@ 0 Volts,  
					f = 1 MHz  
					Breakdown Voltage  
					Reverse  
					Leakage  
					Clamping  
					Voltage  
					Stand-Off  
					Voltage  
					Maximum  
					Peak Pulse  
					Inverse  
					Blocking  
					Leakage  
					Current  
					μA  
					VBR @ I(BR)  
					Inverse  
					Blocking  
					Voltage  
					Volts  
					@VWM  
					@IPP  
					VC  
					VWM  
					Current IPP  
					@10/1000  
					Amps  
					Gull-Wing  
					“G”  
					Modified  
					“J”  
					Volts  
					ID  
					Bend Lead  
					Bend Lead  
					Volts  
					Volts  
					pF  
					μA  
					1000  
					1000  
					500  
					500  
					250  
					250  
					100  
					100  
					50  
					MIN  
					7.22  
					7.22  
					7.78  
					7.78  
					8.33  
					8.33  
					8.89  
					8.89  
					9.44  
					9.44  
					10.0  
					10.0  
					MAX  
					8.82  
					7.98  
					9.51  
					8.60  
					10.2  
					9.21  
					10.9  
					9.83  
					11.5  
					10.4  
					12.2  
					11.1  
					mA  
					10  
					10  
					10  
					10  
					10  
					10  
					1
					1
					1
					1
					1
					SMCGLCE6.5  
					SMCGLCE6.5A  
					SMCGLCE7.0  
					SMCGLCE7.0A  
					SMCGLCE7.5  
					SMCGLCE7.5A  
					SMCGLCE8.0  
					SMCGLCE8.0A  
					SMCGLCE8.5  
					SMCGLCE8.5A  
					SMCGLCE9.0  
					SMCGLCE9.0A  
					SMCJLCE6.5  
					SMCJLCE6.5A  
					SMCJLCE7.0  
					SMCJLCE7.0A  
					SMCJLCE7.5  
					SMCJLCE7.5A  
					SMCJLCE8.0  
					SMCJLCE8.0A  
					SMCJLCE8.5  
					SMCJLCE8.5A  
					SMCJLCE9.0  
					SMCJLCE9.0A  
					6.5  
					6.5  
					7.0  
					7.0  
					7.5  
					7.5  
					8.0  
					8.0  
					8.5  
					8.5  
					9.0  
					9.0  
					12.3  
					11.2  
					13.3  
					12.0  
					14.3  
					12.9  
					15.0  
					13.6  
					15.9  
					14.4  
					16.9  
					15.4  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					94  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					75  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					10  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					100  
					50  
					10  
					10  
					100  
					89  
					97  
					1
					Copyright © 2009  
					2-11-2009 REV J  
					Microsemi  
					Page 1  
					Scottsdale Division  
					8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503