AZ943
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• High performance
• Low seated height
• Flux tight and sealed versions available
• Class B insulation (130°C) standard
• Class F insulation (155°C) available
• UL, CUR file E43203
• TÜV file R50161256
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
1 x 107
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
1 x 105 at 10 A 277 VAC Res.
Operate Time
Release Time
10 ms max.
Ratings
Form A and C
Max. switched power: 210 W or 2770 VA
Max. switched current: 15 A AC, 7 A DC
Max. switched voltage: 30 VDC or 300 VAC
5 ms max.
(with no coil suppression)
UL/CUR
1 Form A
Dielectric Strength
1500 Vrms contact to coil
15 A at 125 VAC, general use
10A at 277 VAC, general use, 100,000 cycles
TV - 5 120 VAC
(at sea level for 1 min.) 1000 Vrms across contacts
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
1/2 HP at 125 VAC
125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.)
Dropout
Greater than 10% of nominal coil voltage
8A at 125 VAC, 1000W (N.O.)Tungsten
Ambient Temperature At nominal coil voltage
1 Form C
Operating
Storage
-40°C(-40°F) to 90°C(194°F) Class B
-40°C(-40°F) to 110°C(230°F) Class F
10 A at 277 VAC, general use, 100,000 cycles
1/2 HP at 125 VAC N.O.
125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.)
10 A/7A N.O./N.C. at 30 VDC resistive
-40°C(-40°F) to 130°C(266°F)
TÜV
Vibration
0.062" DA at 10–55 Hz
10 g
1 Form A
Shock
10 A at 277 VAC, resistive, 70k cycles
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
1 Form C
Terminals
5 A at 250 VAC, resistive, 100k cycles
8 A at 250 VAC, resistive, 50k cycles
12 A at 125 VAC, resistive, 100k cycles
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Material
Silver tin oxide (gold plating available not TÜV approved)
80°C (176°F)
Resistance
< 100 milliohms initially
(24 V, 1 A method)
Max. Immersion Time 30 seconds
Weight
10 g
COIL
Power
NOTES
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.8 W at 20°C (68°F) Class B
2.4 W at 20°C (68°F) Class F
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
Temperature Rise
Temperature
32°C (58°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
8/13/09
