AZ9375
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint
• Thin vertical profile only 0.275" (7 mm) wide
• Dielectric strength 4000 Vrms
• Type ‘F’ 155°C wire standard
• 10 Amp switching capability
• UL, CUR file E44211
• TUV R50284629
CONTACTS
GENERAL DATA
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
5 million operations
1 X 105 at 5 A, 250 VAC Res.
Max. switched power: 150 W or 1250 VA
Max. switched current: 10 A
Max. switched voltage: 30 VDC or 277 VAC
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 4 ms at nominal coil voltage
Rated Load
UL / CSA
10 A at 125 VAC, Res., 100k cycles, 90°C
10 A at 30 VDC, Res., 100k cycles, 90°C
5 A at 250 VAC, Res., 100k cycles, 90°C
1/10 HP at 250 VAC, 100k cycles, 85°C
1.4 FLA / 7.5 LRA at 250 VAC, 100k cycles, 85°C
(with no coil suppression)
Dielectric Strength
750 Vrms between open contacts
(at sea level for 1 min.) 4000 Vrms coil to contact
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
5 A at 250 VAC, Res., 100k cycles, 90°C
10A at 125 VAC, 30 VDC, Res., 100k cycles, 90°C
TUV
Dropout
Greater than 10% of nominal coil voltage
Material
Silver nickel
Ambient Temperature At nominal coil voltage
Resistance
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
Operating
Storage
-40°C (-40°F) to 90°C (194°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
10 g
COIL
Shock
Power
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
At Pickup Voltage
(typical)
113 mW
Terminals
Max. Continuous
Dissipation
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
338 mW at 20°C (68°F) ambient
Temperature Rise
Temperature
40°C (104°F) at nominal coil voltage
5 seconds
Max. 105°C (221°F)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight 4 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
6/17/14
