SUPPLY VOLTAGE
MONITOR
ZM33064
ISSUE 4 - JULY 2006
DEVICE DESCRIPTION
FEATURES
The ZM33064 is a three terminal under
voltage monitor circuit for use in
microprocessor systems. The threshold
voltage of the device hasbeen set to 4.6 volts
making it ideal for 5 volt circuits.
SO8, SOT223 and TO92 packages
Power on reset generator
Automatic reset generation
Low standby current
•
•
•
•
•
•
•
Guaranteed operation from 1 volt
Wide supply voltage range
Included in the device is a precise voltage
reference and a comparator with built in
hysteresis to prevent erratic operation. The
ZM33064 features an open collector output
capable of sinking at least l0mA which only
requires a single external resistor to
interface to following circuits.
Internal clamp diode to discharge delay
capacitor
4.6 volt threshold for 5 volt logic
•
•
20mV hysteresis prevents erratic operation
APPLICATIONS
Operation of the device is guaranteed from
one volt upwards, from this level to the
device threshold voltage the output is held
low providing a power on reset function.
Shouldthesupplyvoltage, onceestablished,
at any time drop below the threshold level
then the output again will pull low.
Microprocessor systems
•
Computers
•
Computer peripherals
•
Instrumentation
•
Automotive
•
Battery powered equipment
•
The device is available in a TO92 package for
through hole applicationsaswell asSO8 and
SOT223 for surface mount requirements.
SCHEMATIC DIAGRAM
Issue 4 - July 2006
© Zetex Semiconductors plc 2006
