NZX series  
					NXP Semiconductors  
					Single Zener diodes  
					11. Legal information  
					11.1 Data sheet status  
					Document status[1][2]  
					Product status[3]  
					Development  
					Definition  
					Objective [short] data sheet  
					This document contains data from the objective specification for product development.  
					This document contains data from the preliminary specification.  
					This document contains the product specification.  
					Preliminary [short] data sheet Qualification  
					Product [short] data sheet Production  
					[1]  
					[2]  
					[3]  
					Please consult the most recently issued document before initiating or completing a design.  
					The term ‘short data sheet’ is explained in section “Definitions”.  
					The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status  
					information is available on the Internet at URL http://www.nxp.com.  
					damage. NXP Semiconductors accepts no liability for inclusion and/or use of  
					NXP Semiconductors products in such equipment or applications and  
					therefore such inclusion and/or use is at the customer’s own risk.  
					11.2 Definitions  
					Draft — The document is a draft version only. The content is still under  
					internal review and subject to formal approval, which may result in  
					modifications or additions. NXP Semiconductors does not give any  
					representations or warranties as to the accuracy or completeness of  
					information included herein and shall have no liability for the consequences of  
					use of such information.  
					Applications — Applications that are described herein for any of these  
					products are for illustrative purposes only. NXP Semiconductors makes no  
					representation or warranty that such applications will be suitable for the  
					specified use without further testing or modification.  
					Limiting values — Stress above one or more limiting values (as defined in  
					the Absolute Maximum Ratings System of IEC 60134) may cause permanent  
					damage to the device. Limiting values are stress ratings only and operation of  
					the device at these or any other conditions above those given in the  
					Characteristics sections of this document is not implied. Exposure to limiting  
					values for extended periods may affect device reliability.  
					Short data sheet — A short data sheet is an extract from a full data sheet  
					with the same product type number(s) and title. A short data sheet is intended  
					for quick reference only and should not be relied upon to contain detailed and  
					full information. For detailed and full information see the relevant full data  
					sheet, which is available on request via the local NXP Semiconductors sales  
					office. In case of any inconsistency or conflict with the short data sheet, the  
					full data sheet shall prevail.  
					Terms and conditions of sale — NXP Semiconductors products are sold  
					subject to the general terms and conditions of commercial sale, as published  
					at http://www.nxp.com/profile/terms, including those pertaining to warranty,  
					intellectual property rights infringement and limitation of liability, unless  
					explicitly otherwise agreed to in writing by NXP Semiconductors. In case of  
					any inconsistency or conflict between information in this document and such  
					terms and conditions, the latter will prevail.  
					11.3 Disclaimers  
					General — Information in this document is believed to be accurate and  
					reliable. However, NXP Semiconductors does not give any representations or  
					warranties, expressed or implied, as to the accuracy or completeness of such  
					information and shall have no liability for the consequences of use of such  
					information.  
					No offer to sell or license — Nothing in this document may be interpreted  
					or construed as an offer to sell products that is open for acceptance or the  
					grant, conveyance or implication of any license under any copyrights, patents  
					or other industrial or intellectual property rights.  
					Right to make changes — NXP Semiconductors reserves the right to make  
					changes to information published in this document, including without  
					limitation specifications and product descriptions, at any time and without  
					notice. This document supersedes and replaces all information supplied prior  
					to the publication hereof.  
					Export control — This document as well as the item(s) described herein  
					may be subject to export control regulations. Export might require a prior  
					authorization from national authorities.  
					Quick reference data — The Quick reference data is an extract of the  
					product data given in the Limiting values and Characteristics sections of this  
					document, and as such is not complete, exhaustive or legally binding.  
					Suitability for use — NXP Semiconductors products are not designed,  
					authorized or warranted to be suitable for use in medical, military, aircraft,  
					space or life support equipment, nor in applications where failure or  
					malfunction of an NXP Semiconductors product can reasonably be expected  
					to result in personal injury, death or severe property or environmental  
					11.4 Trademarks  
					Notice: All referenced brands, product names, service names and trademarks  
					are the property of their respective owners.  
					12. Contact information  
					For more information, please visit: http://www.nxp.com  
					For sales office addresses, please send an email to: salesaddresses@nxp.com  
					NZX_SER_2  
					© NXP B.V. 2009. All rights reserved.  
					Product data sheet  
					Rev. 02 — 3 June 2009  
					11 of 12