AZ767
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
GENERAL DATA
• Class B insulation standard
• Epoxy sealed version available
• 10 Amp switching
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
• UL, CUR file E44211
Operate Time (typical) 8 ms at nominal coil voltage
CONTACTS
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Ratings
Resistive load:
Max. switched power: 150 W (SPST-NO) standard
1250 VA (SPST-NO) standard
90 W (SPST-NO) sensitive
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
750 VA (SPST-NO) sensitive
90 W (SPDT)
750 W (SPDT)
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 90°C (194°F), standard
-40°C (-40°F) to 105°C (221°F), sensitive
-40°C (-40°F) to 130°C (266°F)
Max. switched current: 10 A AC SPST-NO standard
5 A DC SPST-NO standard
3 A AC/DC SPST-NO sensitive
3 A AC/DC SPDT
Max. switched voltage:150* VDC or 380 VAC
Storage
Vibration
0.062" DA at 10–50 Hz
10 g operating, 100 g damage
P.B.T. polyester
Shock
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Enclosure
Rated Load
UL, CUR
Form A
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
10 A at 125 VAC, Res., 30k cycles [1]
10 A at 125 VAC, General Use., 100k cycles [2]
5 A at 250 VAC, General Use, 100k [1][2]
5 A at 30 VDC, Res., 100k cycles [1][2]
300 W at 120 VAC Tungsten [2]
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
3 A at 250 VAC, General Use, 100k cycles [1][2]
sensitive
Max. Immersion Time 30 seconds
3 A at 30 VDC, Res., 100k cycles [1][2] - sensitive
5 A at 125 VAC, Res., 100k cycles [1] - sensitive
10 LRA / 1.5 FLA at 120 VAC, 100k cycles [1]
1/10 HP at 125 VAC, 100k cycles [1]
1/16 HP at 250 VAC, 100k cycles [1]
8 A at 250 VAC, General Use, 100k cycles [2] - sensitive
high capacity
Weight
6 grams
COIL
Power
At Pickup Voltage
(typical)
253 mW standard
113 mW sensitive
Form C
3 A at 250 VAC, General Use, 100k cycles [1][2]
3 A at 30 VDC, Res., 100k cycles [1][2]
[1] silver cadmium oxide [2] silver nickel
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
Material
Silver cadmium oxide or silver nickel
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
9/6/06 W
