ELECTRICAL CHARACTERISTICS  
					LZJ Series  
					Electrical Characteristics  
					TA = 25°C unless otherwise noted  
					Zzt@Izt  
					(Ohms)  
					Max  
					IR@VR  
					(uA)  
					Max  
					VZ@Izt  
					Izt  
					Device  
					Type  
					T
					Zzk@Izk  
					(Ohms) Max  
					Izk  
					(mA)  
					VR  
					(V)  
					(mA)  
					Tolerance  
					Min  
					Nom  
					Max  
					A
					B
					C
					D
					A
					B
					C
					D
					A
					B
					C
					D
					A
					B
					C
					D
					26.99  
					27.70  
					28.36  
					29.02  
					29.68  
					30.32  
					30.90  
					31.49  
					32.14  
					32.79  
					33.40  
					34.01  
					34.68  
					35.36  
					36.00  
					36.63  
					27.69  
					28.42  
					29.09  
					29.77  
					30.45  
					31.10  
					31.70  
					32.30  
					32.97  
					33.64  
					34.27  
					34.89  
					35.58  
					36.28  
					36.93  
					37.58  
					28.39  
					29.13  
					29.82  
					30.51  
					31.22  
					31.88  
					32.50  
					33.11  
					33.79  
					34.49  
					35.13  
					35.77  
					36.47  
					37.19  
					37.85  
					38.52  
					LZJ30V  
					LZJ33V  
					LZJ36V  
					LZJ39V  
					5
					5
					5
					5
					55  
					65  
					75  
					85  
					250  
					250  
					250  
					250  
					0.5  
					0.5  
					0.5  
					0.5  
					0.2  
					0.2  
					0.2  
					0.2  
					23  
					25  
					27  
					30  
					VF (forward voltage) = 1.2 V maximum @ IF = 200mA for all types  
					Notes:  
					1. TOLERANCE AND VOLTAGE DESIGNATION  
					The type numbers listed have zener voltage as shown  
					2. SPECIALS AVAILABLE INCLUDE  
					Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery,  
					contact you nearest Tak Cheong representative.  
					3. ZENER VOLTAGE (VZ) MEASUREMENT  
					The zener voltage is measured under pulse conditions such that TJ is no more than 2℃ above TA.  
					4. ZENER IMPEDANCE (ZZ) DERIVATION  
					Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the  
					dc zener current (IZT) is superimposed to IZT  
					.
					5. WHEN ORDERING, PLEASE SPECIFY TOLERANCE A, B. C OR D  
					http://www.yeashin.com  
					3
					REV.02 20130403